Thermaltake Toughpower GF3 850W power supply PS-TPD-0850FNFAGU-4
- ATX 12V v3.1
- 850 W
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Thermaltake
ATX 3.0 compatible 1650W fully modular unit with native 12VHPWR connector delivering 600W for PCIe 5.0 graphics cards, 80 Plus Gold efficiency, 140mm hydraulic bearing fan and 16 SATA connectors
Options 1650W
This 1650W fully modular power supply meets the ATX 3.0 specification and includes two native 12VHPWR connectors rated for 600W each. It delivers 80 Plus Gold efficiency with a single +12V rail and 100% Japanese capacitors. A 140mm hydraulic bearing fan provides cooling. The unit measures 180mm in length.
Verify that your motherboard and chassis support the ATX 3.0 form factor and 180mm depth before ordering. Ensure the 24-pin main connector and both 12VHPWR cables reach your graphics card and board without strain. Confirm your wall outlet supplies 100-240V at 50-60Hz. The unit provides sixteen SATA power connectors for drives.
This PSU targets enthusiasts running PCIe 5.0 graphics cards that demand dual 600W 12VHPWR connections. It also fits workstations requiring 1650W continuous output with full modular cabling. Builders with smaller cases, lower-wattage GPUs, or no need for ATX 3.0 power excursion handling should consider a lower-capacity unit.
| Brand | Thermaltake |
|---|---|
| Series | Toughpower GF3 Series |
| Model | PS-TPD-1650FNFAGU-4 |
| Type | ATX / ATX 3.0 Compatible / ATX12V |
| Maximum Power | 1650 W |
| Fans | 140mm Hydraulic Bearing Fan |
| PFC | Active |
| Main Connector | 24Pin |
| +12V Rails | Single |
| PCI-Express Connector | 12VHPWR Support Wattage: 600W |
| SATA Power Connector | 16 |
| Haswell Support | Yes |
| Max PSU Length | 180 mm |
| Modular | Full Modular |
| Power Good Signal | 100-500ms |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50Hz - 60Hz |
| Input Current | 20 - 16A |
| Output | +3.3V@25A, +5V@25A, [email protected] , [email protected] , +5VSB@3A |
| Approvals | CE/UKCA/cTUVus/TÜV/FCC/IC/BSMI/EAC/CB/BIS/KCC |
| Connectors | 1 x 24 pin ATX / 16 x SATA |
| Dimensions | 5.9" x 3.4" x 7.1" |
| Weight | 4.72 |
| وزن الشحنة | 4.76 kg |
| أبعاد الطرد | 338 × 239 × 160 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes, the native 12VHPWR connector is rated to deliver up to 600 W to a PCIe 5.0 graphics card.
At 180 mm long, the unit fits most ATX cases, but you should verify the maximum PSU length your chassis supports.
Sixteen SATA power connectors are provided, allowing up to 16 drives or peripherals to be connected at once.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟