OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Thermaltake
ATX mid-tower case with curved and flat tempered glass panels, two pre-installed 120mm rear fans, support for 360mm radiators, 460mm GPUs, 260mm PSUs.
This ATX mid-tower chassis features a curved 4mm tempered glass side panel and a full glass front panel for wide component visibility. It supports Mini-ITX, Micro-ATX and ATX motherboards, including hidden-connector designs from ASUS, MSI and Gigabyte. Two pre-installed 120mm CT PWM fans provide rear exhaust airflow out of the box.
The case arrives with the two rear fans already mounted, reducing initial build time. Builders must supply their own 90-degree riser cable if they plan to use the rotatable PCIe tray for vertical GPU mounting. Hidden-connector motherboards require careful cable routing through the dedicated cutouts to avoid blocking the glass panels.
Verify that your graphics card length does not exceed 460mm and that your CPU cooler height stays within 160mm. Confirm the power supply length is no longer than 260mm to fit the allocated bay. Ensure the chosen motherboard form factor matches the supported Mini-ITX, Micro-ATX or ATX dimensions.
| Motherboard Compatibility | 6.7 x 6.7 (Mini ITX), 9.6 x 9.6 (Micro ATX), 12 x 9.6 (ATX) |
|---|---|
| Brand | Thermaltake |
| Series | Thermaltake View 390 TG |
| Color | Black |
| Case Material | SPCC |
| Type | ATX Mid Tower |
| Side Panel | 4mm Tempered Glass x 2 |
| Internal 3.5" Drive Bays | 2 |
| وزن الشحنة | 13.25 kg |
| أبعاد الطرد | 591 × 559 × 381 mm |
Connect the fans to a PWM header, power on the system and verify both rear 120mm fans spin; adjust speed in BIOS or fan software to confirm control response.
The case includes two preinstalled 120mm CT PWM fans, two 4mm tempered glass panels, and mounting hardware; a 90-degree PCIe riser cable for vertical GPU mounting and the optional 3.9-inch LCD screen kit are sold separately.
The single CA-11F-00M1WN-01 model supports GPUs up to 460mm and radiators up to 360mm, so this version covers both requirements without needing a different SKU.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟