NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Tripp Lite
Wall-mount 19 in. rack cabinet holds 18U of server-depth gear up to 32.5 in. deep while extending only 24 in. from the wall
The Tripp Lite SRW18UHD is an 18U side-mount wall cabinet that holds 19-inch rack equipment up to 32.5 inches deep while extending less than 25 inches from the wall. It supports a maximum load of 500 lbs and meets EIA-310-E standards for server and network installations.
The package provides 42 M6 cage nuts, 42 M6 screws, 42 M6 washers, 42 12-24 screws, a key set and an owner's manual so installers can secure gear to square-hole or threaded rails without sourcing extra fasteners.
Equipment depth is capped at 32.5 inches and the cabinet protrudes 24.8 inches from the wall, so deeper servers will not fit; side access is provided by vented doors and a removable panel but front-to-rear airflow paths are constrained by the side-mount orientation.
| Brand | Tripp Lite |
|---|---|
| Model | SRW18UHD |
| Type | Side-Mount Wall-Mount Rack Enclosure Cabinet |
| Rack Units | 18U |
| Color | Black |
| Weight Capacity | 500 lbs. |
| Specification | Installed whole system maximum rack depth: 32.5" Installed whole system minimum rack depth: 3" EIA Mounting Rails: Square holes / 12-24 threaded holes CERTIFICATIONS Certifications: EIA-310-E NOM (Mexico): Tested NOM (Mexico) Approvals: RoHS |
| Features | Heavy-Duty/High Weight Capacity side-mount construction 18U of server depth equipment capacity Fully vented doors and side panel Adjustable front and rear rails Dual-rail mounting designs supports equipment mounting via square holes or threaded holes 500lb weight capacity |
| Included Accessory | SRW18UHD Wall-mount enclosure cabinet (42) M6 cage nuts (42) M6 equipment mounting screws (42) M6 washers (42) 12-24 equipment mounting screws (1) Key set Owner's Manual |
| Unit Dimension | 36.96" x 36.22" x 24.77" |
| Unit Weight | 119.9 lbs. |
| Shipping Dimension | 41.33" x 37.80" x 25.60" |
| Shipping Weight | 137.5 lbs. |
| وزن الشحنة | 68.04 kg |
| أبعاد الطرد | 1082 × 972 × 668 mm |
The 42 M6 cage nuts and 42 M6 equipment mounting screws are included for initial installation; replacements are only needed if threads strip or hardware is lost during future equipment changes.
The 500 lb maximum load capacity is the structural limit; the side-mount design reduces leverage on the wall, so the cabinet frame reaches its rated capacity before the wall mounting does.
Fully vented doors, top, bottom and removable side panel provide passive airflow; heat dissipation depends on the installed equipment's own cooling and room ambient temperature.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟