نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 60×38 mm axial case fan with three-pin power connector

Zyvpee

Zyvpee FFB0612EHE 60×38mm 12V 1.2A 3-pin case fan

SKU CH-0CZS-WK7Z6

A 60 mm by 38 mm dual-ball-bearing case fan running at 12 V and 1.2 A with a three-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Dual-ball bearing extends service life
  • 12 V 1.2 A delivers strong airflow
  • 60 × 38 mm fits standard 60 mm mounts
  • Three-pin connector enables speed monitoring
  • Non-LED black frame suits professional builds

Compact server-grade axial fan

The Zyvpee FFB0612EHE is a 60 by 38 millimetre case fan built for dense server and industrial chassis. It runs on 12 volt DC power and draws 1.2 amperes through a three-pin connector. Dual ball bearings support continuous high-speed operation in demanding airflow paths.

Suited for high-static-pressure slots.

This unit fits 60 millimetre mounting holes where strong, focused airflow is required, such as 1U servers, network appliances or GPU cooler replacements. It lacks PWM control, LED lighting and low-noise optimisation, so builders who need silent operation or motherboard fan-curve management should look elsewhere.

Three-pin 12 V 1.2 A power interface

The only specification that determines fit is the three-pin 12 volt 1.2 ampere power interface; the motherboard or fan controller must supply that exact voltage and current header. Physical mounting holes follow the 60 by 38 millimetre pattern, so verify chassis clearance before purchase.

أبرز المميزات

  • Dual-ball bearing extends service life
  • 12 V 1.2 A delivers strong airflow
  • 60 × 38 mm fits standard 60 mm mounts
  • Three-pin connector enables speed monitoring
  • Non-LED black frame suits professional builds

المواصفات

BrandZyvpee
SeriesFFB0612EHE
ModelFFB0612EHE
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Power Fan
Dimensions60*38mm

أسئلة حول هذا المنتج

Does my case have a 60 mm by 38 mm mounting area for this 60 mm fan?

The fan measures 60 mm square by 38 mm thick, so your case must provide a 60 mm mounting grid with at least 38 mm clearance behind it.

Can I run this 12 V 1.2 A fan on a standard 3-pin motherboard header?

Yes, the 3-pin connector fits any standard 3-pin or 4-pin fan header; the board will supply 12 V and the fan will draw up to 1.2 A.

How do I confirm the 2-ball bearing fan is spinning correctly after installation?

Check the BIOS or monitoring software for an RPM reading on that header; a steady value above zero shows the fan is running.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.