暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 60×38 mm axial case fan with three-pin power connector

Zyvpee

Zyvpee FFB0612EHE 60×38mm 12V 1.2A 3-pin case fan

SKU CH-0CZS-WK7Z6

A 60 mm by 38 mm dual-ball-bearing case fan running at 12 V and 1.2 A with a three-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Dual-ball bearing extends service life
  • 12 V 1.2 A delivers strong airflow
  • 60 × 38 mm fits standard 60 mm mounts
  • Three-pin connector enables speed monitoring
  • Non-LED black frame suits professional builds

Compact server-grade axial fan

The Zyvpee FFB0612EHE is a 60 by 38 millimetre case fan built for dense server and industrial chassis. It runs on 12 volt DC power and draws 1.2 amperes through a three-pin connector. Dual ball bearings support continuous high-speed operation in demanding airflow paths.

Suited for high-static-pressure slots.

This unit fits 60 millimetre mounting holes where strong, focused airflow is required, such as 1U servers, network appliances or GPU cooler replacements. It lacks PWM control, LED lighting and low-noise optimisation, so builders who need silent operation or motherboard fan-curve management should look elsewhere.

Three-pin 12 V 1.2 A power interface

The only specification that determines fit is the three-pin 12 volt 1.2 ampere power interface; the motherboard or fan controller must supply that exact voltage and current header. Physical mounting holes follow the 60 by 38 millimetre pattern, so verify chassis clearance before purchase.

特長

  • Dual-ball bearing extends service life
  • 12 V 1.2 A delivers strong airflow
  • 60 × 38 mm fits standard 60 mm mounts
  • Three-pin connector enables speed monitoring
  • Non-LED black frame suits professional builds

仕様

BrandZyvpee
SeriesFFB0612EHE
ModelFFB0612EHE
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Power Fan
Dimensions60*38mm

この商品に関する質問

Does my case have a 60 mm by 38 mm mounting area for this 60 mm fan?

The fan measures 60 mm square by 38 mm thick, so your case must provide a 60 mm mounting grid with at least 38 mm clearance behind it.

Can I run this 12 V 1.2 A fan on a standard 3-pin motherboard header?

Yes, the 3-pin connector fits any standard 3-pin or 4-pin fan header; the board will supply 12 V and the fan will draw up to 1.2 A.

How do I confirm the 2-ball bearing fan is spinning correctly after installation?

Check the BIOS or monitoring software for an RPM reading on that header; a steady value above zero shows the fan is running.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。