Zyvpee
Zyvpee FFB0612EHE 60×38mm 12V 1.2A 3-pin case fan
A 60 mm by 38 mm dual-ball-bearing case fan running at 12 V and 1.2 A with a three-pin connector
- TypeCase Fan
- CompatibilityCase
- Bearing Type2 Ball
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Dual-ball bearing extends service life
- 12 V 1.2 A delivers strong airflow
- 60 × 38 mm fits standard 60 mm mounts
- Three-pin connector enables speed monitoring
- Non-LED black frame suits professional builds
Compact server-grade axial fan
The Zyvpee FFB0612EHE is a 60 by 38 millimetre case fan built for dense server and industrial chassis. It runs on 12 volt DC power and draws 1.2 amperes through a three-pin connector. Dual ball bearings support continuous high-speed operation in demanding airflow paths.
Suited for high-static-pressure slots.
This unit fits 60 millimetre mounting holes where strong, focused airflow is required, such as 1U servers, network appliances or GPU cooler replacements. It lacks PWM control, LED lighting and low-noise optimisation, so builders who need silent operation or motherboard fan-curve management should look elsewhere.
Three-pin 12 V 1.2 A power interface
The only specification that determines fit is the three-pin 12 volt 1.2 ampere power interface; the motherboard or fan controller must supply that exact voltage and current header. Physical mounting holes follow the 60 by 38 millimetre pattern, so verify chassis clearance before purchase.
Puntos fuertes
- Dual-ball bearing extends service life
- 12 V 1.2 A delivers strong airflow
- 60 × 38 mm fits standard 60 mm mounts
- Three-pin connector enables speed monitoring
- Non-LED black frame suits professional builds
Especificaciones
| Brand | Zyvpee |
|---|---|
| Series | FFB0612EHE |
| Model | FFB0612EHE |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | 2 Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC Power Fan |
| Dimensions | 60*38mm |
Preguntas sobre este artículo
Does my case have a 60 mm by 38 mm mounting area for this 60 mm fan?
The fan measures 60 mm square by 38 mm thick, so your case must provide a 60 mm mounting grid with at least 38 mm clearance behind it.
Can I run this 12 V 1.2 A fan on a standard 3-pin motherboard header?
Yes, the 3-pin connector fits any standard 3-pin or 4-pin fan header; the board will supply 12 V and the fan will draw up to 1.2 A.
How do I confirm the 2-ball bearing fan is spinning correctly after installation?
Check the BIOS or monitoring software for an RPM reading on that header; a steady value above zero shows the fan is running.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001049BTC
En stock