Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black steel ATX mid-tower with dual tempered glass side panels and four pre-installed ARGB PWM fans visible through the glass

DIYPC

DIYPC IDX2-Ultra-ARGB ATX mid-tower PC case

SKU CH-A2P0-G8GAR MPN IDX2-Ultra-ARGB

ATX mid-tower case with dual tempered glass panels, four pre-installed 120mm ARGB PWM fans and top 360mm radiator support for high-performance builds

  • TypeATX Mid Tower
  • ColorBlack
  • Case MaterialSteel / Tempered Glass
  • With Power SupplyNo
  • Power Supply MountedBottom
  • Motherboard CompatibilityATX / Micro ATX / Mini ITX

Options IDX2-Ultra-ARGB (Black)

  • Panoramic 270° dual tempered glass showcases the full build
  • Four pre-installed 120 mm ARGB PWM fans deliver instant airflow
  • Top panel supports up to 360 mm radiator for liquid cooling
  • Bottom I/O provides two USB 3.0 ports plus Type C for fast data
  • Ten fan mounts and 435 mm GPU clearance allow high-performance expansion

Panoramic ATX mid-tower

The DIYPC IDX2-Ultra-ARGB is a black steel chassis with dual tempered glass side panels that create a 270 degree view of the internal build. It accepts ATX, Micro ATX and Mini ITX motherboards and mounts the power supply at the bottom. Four ARGB PWM fans come pre-installed, three on the side as reverse-blade units and one at the rear.

Builders who want visibility and ARGB lighting

This case suits enthusiasts who want a showcase build with extensive glass and addressable lighting controlled either by a top-panel button or a motherboard 5V 3-pin header. It is less suited for compact ITX-only layouts or for systems that need more than seven expansion slots or more than three 3.5 inch drive bays.

Pre-installed fans and PWM hub

The four included 120mm ARGB PWM fans and the supplied fan hub deliver coordinated cooling and lighting straight from the box. Builders can add up to ten fans in total using the top, PSU shroud and side mounts, and the top panel supports a 360mm radiator for liquid cooling upgrades.

Přednosti

  • Panoramic 270° dual tempered glass showcases the full build
  • Four pre-installed 120 mm ARGB PWM fans deliver instant airflow
  • Top panel supports up to 360 mm radiator for liquid cooling
  • Bottom I/O provides two USB 3.0 ports plus Type C for fast data
  • Ten fan mounts and 435 mm GPU clearance allow high-performance expansion

Specifikace

BrandDIYPC
ModelIDX2-Ultra-ARGB
Part NumberIDX2-Ultra-ARGB
TypeATX Mid Tower
ColorBlack
Case MaterialSteel / Tempered Glass
With Power SupplyNo
Power Supply MountedBottom
Motherboard CompatibilityATX / Micro ATX / Mini ITX
Side Panel2 x Sides Tempered Glass Panel
LEDARGB
Internal 3.5" Drive Bays3
Internal 2.5" Drive Bays2
Expansion Slots7
Fan OptionsTop: 3 x 120mm or 2 x 140mm fan (Optional)
PSU box: 3 x 120mm or 2 x 140mm fan (Optional)
Side: 3 x 120mm ARGB Reverse Blade PWM Fan (pre-installed)
Rear: 1 x 120mm ARGB PWM fan (pre-installed)
Pre-installed FansRear - 1 x 120mm / Side - 3 x 120mm
Radiator OptionsTop support up to 360mm AIO
Max GPU Length435 mm
Max CPU Cooler Height185 mm
Max PSU Length245 mm
Přepravní hmotnost10.89 kg
Rozměry balení564 × 531 × 312 mm

Další verze tohoto modelu

Dalších 4 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does the case include a power supply, or do I need to supply my own ATX unit up to 245 mm long?

No power supply is included. The bottom mount accepts a standard ATX unit up to 245 mm in length.

Will my existing 360 mm top-mount radiator fit alongside the pre-installed side and rear fans?

Yes, the top supports a 360 mm AIO. The four pre-installed 120 mm ARGB PWM fans occupy the side and rear only.

How do I confirm the ARGB lighting is syncing through the motherboard 5 V 3-pin header after build?

Connect the included PWM ARGB hub to the motherboard 5 V 3-pin header, then use the board's RGB software to control all four pre-installed fans.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.