Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black steel ATX tower with front and side tempered glass panels, four pre-installed ARGB fans visible through mesh top

DIYPC

DIYPC IDX3-ATX-ARGB Black ATX PC Case with 4 ARGB Fans

SKU CH-8QHW-F11AZ MPN IDX3-ATX-ARGB

Black ATX tower with dual tempered glass panels and four pre-installed ARGB PWM fans for high-airflow builds

  • TypeATX Tower
  • ColorBlack
  • Case MaterialSteel / Tempered Glass
  • With Power SupplyNo
  • Power Supply MountedTop
  • Motherboard CompatibilityATX / ITX / Micro ATX

Options IDX3-ATX-ARGB

  • Panoramic 270° view through dual tempered glass panels
  • Four pre-installed 120mm ARGB PWM fans for immediate airflow
  • Top and motherboard-side support for 360mm radiators
  • Fits graphics cards up to 407mm and CPU coolers up to 162mm
  • Front I/O with two USB 3.0 ports, one Type-C port and HD audio

Panoramic ATX Case with 270 View

The DIYPC IDX3-ATX-ARGB is a black steel tower with dual tempered glass panels that give a 270 degree view of the internal build. It accepts ATX, Micro ATX and ITX motherboards and ships with four 120mm ARGB PWM fans already installed. An integrated ARGB light strip and a PWM-capable ARGB hub are included for lighting control.

Motherboard Form Factor and Clearances

Confirm that your motherboard matches the supported ATX, Micro ATX or ITX form factors before ordering. The case allows graphics cards up to 407 mm long and CPU coolers up to 162 mm tall. Power supplies can be up to 200 mm in length and mount at the top of the chassis. Top and motherboard-side radiator support extends to 360 mm.

Pre-Installed Fans and ARGB Hub

Four ARGB PWM fans are fitted at the factory: three reverse-blade units on the motherboard side and one at the rear. The bundled ARGB hub connects to a 5V addressable header on the motherboard for software synchronisation, while a manual LED button on the top I/O panel provides hardware control. Front I/O includes two USB 3.0 ports, one USB Type-C port and HD audio jacks.

Přednosti

  • Panoramic 270° view through dual tempered glass panels
  • Four pre-installed 120mm ARGB PWM fans for immediate airflow
  • Top and motherboard-side support for 360mm radiators
  • Fits graphics cards up to 407mm and CPU coolers up to 162mm
  • Front I/O with two USB 3.0 ports, one Type-C port and HD audio

Specifikace

BrandDIYPC
ModelIDX3-ATX-ARGB
TypeATX Tower
ColorBlack
Case MaterialSteel / Tempered Glass
With Power SupplyNo
Power Supply MountedTop
Motherboard CompatibilityATX / ITX / Micro ATX
Side PanelYes
LEDARGB
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays2
Expansion Slots8
Front Ports2 x USB 3.0 / 1 x Type C / Audio In & Out (HD)
Fan OptionsTop: 3 x 120mm or 2 x 140mm fan (Optional)
MB Side: 3 x 120mm ARGB Reverse Blade PWM Fan (pre-installed)
Rear: 1 x 120mm ARGB PWM fan (pre-installed)
Bottom: 3 x 120mm fan (Optional)
Radiator OptionsTop/ MB support up to 360mm liquid cooler
120mm Fans4
Max GPU Length407 mm
Max CPU Cooler Height162 mm
Max PSU Length200 mm
Dimensions17.12" x 11.2" x 17.4"
Weight12
Přepravní hmotnost7.58 kg
Rozměry balení495 × 483 × 343 mm

Další verze tohoto modelu

Dalších 4 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will a graphics card longer than 407 mm fit in this case?

The case accepts cards up to 407 mm, so anything longer will not fit.

Can I mount a 360 mm radiator on the motherboard side?

Yes, the motherboard side supports a 360 mm liquid cooler alongside the three pre-installed ARGB fans.

Does the front Type-C port work with a motherboard that only has USB 3.0 headers?

The front I/O includes a Type-C connector that requires a matching motherboard header; it will not connect to a standard USB 3.0 header.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.