Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black micro-ATX tower with dual tempered glass panels and pre-installed ARGB fans

DIYPC

DIYPC IDX4-MicroATX-ARGB Micro-ATX PC case

SKU CH-GKPY-5CFTG MPN IDX4-MicroATX-ARGB

Micro-ATX tower with dual tempered glass panels, three pre-installed ARGB PWM fans and an integrated light strip, supporting 400 mm graphics cards and 360 mm top radiators

  • TypeMirco ATX Tower
  • ColorBlack
  • Case MaterialSteel / Tempered Glass
  • With Power SupplyNo
  • Power Supply MountedBottom
  • Motherboard CompatibilityITX / Micro ATX

Options IDX4-microATX-ARGB

  • Pre-installed ARGB fans and light strip deliver vibrant illumination
  • Top panel supports up to 360 mm radiator for liquid cooling
  • Front I/O includes USB 3.0, Type-C and HD audio
  • Dual tempered glass panels showcase components with clean cable routing
  • Fits 400 mm graphics cards and 162 mm CPU coolers

Micro-ATX case with dual tempered glass

The DIYPC IDX4-MicroATX-ARGB is a black steel chassis with tempered glass on the front and side panels. It accepts ITX and Micro-ATX motherboards and comes with three 120mm ARGB PWM fans already installed. An integrated ARGB light strip adds further illumination.

Check motherboard form factor and clearances

Verify that your board is ITX or Micro-ATX before ordering. The case allows a graphics card up to 400 mm long, a CPU cooler up to 162 mm tall and a power supply up to 180 mm deep. Radiator support reaches 360 mm at the top and 240 mm on the motherboard side.

Pre-installed fans and ARGB control

Two 120mm ARGB reverse-blade PWM fans sit on the motherboard side and one 120mm ARGB PWM fan mounts at the rear. Lighting can be managed by a manual LED button or synced through a 5V addressable header on the motherboard. Magnetic dust filters on the top and side simplify cleaning.

Přednosti

  • Pre-installed ARGB fans and light strip deliver vibrant illumination
  • Top panel supports up to 360 mm radiator for liquid cooling
  • Front I/O includes USB 3.0, Type-C and HD audio
  • Dual tempered glass panels showcase components with clean cable routing
  • Fits 400 mm graphics cards and 162 mm CPU coolers

Specifikace

BrandDIYPC
ModelIDX4-MicroATX-ARGB
TypeMirco ATX Tower
ColorBlack
Case MaterialSteel / Tempered Glass
With Power SupplyNo
Power Supply MountedBottom
Motherboard CompatibilityITX / Micro ATX
Side Panelyes
LEDARGB
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays2
Expansion Slots5
Front Ports2 x USB 3.0 / 1 x Type C / Audio In & Out (HD)
Fan OptionsTop: 3 x 120mm or 2 x 140mm fan (Optional)
MB Side: 2 x 120mm ARGB Reverse Blade PWM Fan (pre-installed)
Rear: 1 x 120mm ARGB PWM Fan (pre-installed)
bottom : 3 x 120mm fan (Optional)
Radiator OptionsTop support up to 360mm, MB support 240mm liquid cooler
Max GPU Length400 mm
Max CPU Cooler Height162 mm
Max PSU Length180 mm
Dimensions16.7" x 11" x 14.2"
Weight10lbs
FeaturesDIYPC IDX4-MicroATX-ARGB. It has front and side tempered glass panel, w/top mesh design allow optimized air flow. The case design has bigger interior space to accommodate and improve cooling performance (can support up to 400mm x GPU and 360mm radiator x top). Advanced cable management design - routing the main cable is easy and quick through a hidden channel.
There is a large space behind the motherboard for all cables, making the case a clean and beautiful look.
2 ways to control ARGB Fan Lighting: Either by Manual ARGB LED Button on Top I/O Panel; or if your motherboard has 5v add
Přepravní hmotnost6.53 kg
Rozměry balení495 × 406 × 343 mm

Další verze tohoto modelu

Dalších 4 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does the case ship with the three ARGB fans already installed, or do I need to buy fans separately?

The case comes with two 120 mm ARGB reverse-blade PWM fans on the motherboard side and one 120 mm ARGB PWM fan at the rear already mounted.

Should I choose the top-mounted 360 mm radiator option or the motherboard-side 240 mm option for liquid cooling?

The top supports radiators up to 360 mm while the motherboard side accepts up to 240 mm; pick the one that matches your cooler and available clearance.

Will a 400 mm graphics card and a 162 mm CPU cooler fit together in this build?

Yes, the case allows a maximum GPU length of 400 mm and a maximum CPU cooler height of 162 mm simultaneously.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.