Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green DDR5 RDIMM modules in a kit, bare circuit boards with gold contacts and black chips

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 4800 CL40 1Rx8 ECC RDIMM Supermicro H13DSG-O-CPU

SKU CH-AVHW-B994A

Four 16 GB DDR5 modules deliver 64 GB of registered ECC memory at 4800 MT/s and CL40 for the Supermicro H13DSG-O-CPU motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

Zobrazit dalších 30 konfigurací
  • 64 GB total capacity from four 16 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for memory-intensive tasks
  • ECC and registered design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 1Rx8 rank matches the motherboard memory controller expectations
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-O-CPU compatibility

64 GB DDR5-4800 ECC RDIMM kit

This 64 GB kit contains four 16 GB DDR5-4800 registered ECC modules built for the Supermicro H13DSG-O-CPU motherboard. Each module runs at 1.1 V with CL40 latency and a 1Rx8 organisation. The 288-pin RDIMM form factor matches the board's registered memory slots exactly.

Who this suits and who should look elsewhere

Server administrators who need a validated, fully populated memory upgrade for this specific Supermicro platform will find the correct rank, voltage and timing pre-configured. Buyers who want non-ECC memory, UDIMM or SODIMM form factors, or a different capacity per module should look elsewhere.

Deciding specification — registered ECC

The combination of registered buffering, ECC error correction and 1Rx8 rank at 1.1 V is the single specification that determines compatibility with the H13DSG-O-CPU memory controller. If your system requires a different rank structure, voltage or unbuffered modules, this kit will not function correctly.

Přednosti

  • 64 GB total capacity from four 16 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for memory-intensive tasks
  • ECC and registered design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 1Rx8 rank matches the motherboard memory controller expectations
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-O-CPU compatibility

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 288-pin RDIMM modules fit the Supermicro H13DSG-O-CPU motherboard slots?

Yes, the kit uses the exact 288-pin DDR5 RDIMM form factor the board requires, not UDIMM or SODIMM, so every module seats correctly in the server's memory slots.

What is the correct population order for the four 16 GB sticks on the H13DSG-O-CPU?

Install the modules following the motherboard manual's approved DIMM population sequence; the kit is spec-matched to the board's rules, so full 64 GB capacity is recognised when populated in that order.

Do these registered ECC modules need any firmware updates or battery-backed maintenance over time?

No firmware or battery maintenance is required; the registered ECC design corrects single-bit errors automatically, and the modules are covered by a lifetime replacement warranty if a hardware fault ever occurs.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.