暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 4800 CL40 1Rx8 ECC RDIMM Supermicro H13DSG-O-CPU

SKU CH-AVHW-B994A

Four 16 GB DDR5 modules deliver 64 GB of registered ECC memory at 4800 MT/s and CL40 for the Supermicro H13DSG-O-CPU motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 64 GB total capacity from four 16 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for memory-intensive tasks
  • ECC and registered design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 1Rx8 rank matches the motherboard memory controller expectations
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-O-CPU compatibility

64 GB DDR5-4800 ECC RDIMM kit

This 64 GB kit contains four 16 GB DDR5-4800 registered ECC modules built for the Supermicro H13DSG-O-CPU motherboard. Each module runs at 1.1 V with CL40 latency and a 1Rx8 organisation. The 288-pin RDIMM form factor matches the board's registered memory slots exactly.

Who this suits and who should look elsewhere

Server administrators who need a validated, fully populated memory upgrade for this specific Supermicro platform will find the correct rank, voltage and timing pre-configured. Buyers who want non-ECC memory, UDIMM or SODIMM form factors, or a different capacity per module should look elsewhere.

Deciding specification — registered ECC

The combination of registered buffering, ECC error correction and 1Rx8 rank at 1.1 V is the single specification that determines compatibility with the H13DSG-O-CPU memory controller. If your system requires a different rank structure, voltage or unbuffered modules, this kit will not function correctly.

特長

  • 64 GB total capacity from four 16 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for memory-intensive tasks
  • ECC and registered design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 1Rx8 rank matches the motherboard memory controller expectations
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-O-CPU compatibility

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 288-pin RDIMM modules fit the Supermicro H13DSG-O-CPU motherboard slots?

Yes, the kit uses the exact 288-pin DDR5 RDIMM form factor the board requires, not UDIMM or SODIMM, so every module seats correctly in the server's memory slots.

What is the correct population order for the four 16 GB sticks on the H13DSG-O-CPU?

Install the modules following the motherboard manual's approved DIMM population sequence; the kit is spec-matched to the board's rules, so full 64 GB capacity is recognised when populated in that order.

Do these registered ECC modules need any firmware updates or battery-backed maintenance over time?

No firmware or battery maintenance is required; the registered ECC design corrects single-bit errors automatically, and the modules are covered by a lifetime replacement warranty if a hardware fault ever occurs.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。