Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green printed circuit board with gold edge connectors and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 2Rx4 CL46 1.1V 288-pin ECC RDIMM memory upgrade for Supermicro H14DST-F

SKU CH-02NV-Q9FDW

96GB DDR5 5600 RDIMM with ECC and registered architecture, CL46 at 1.1V, validated for Supermicro H14DST-F motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

Zobrazit dalších 30 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • 96 GB capacity lets the Supermicro H14DST-F reach its maximum supported memory
  • DDR5 5600 speed with CL46 latency delivers the exact timing the board expects
  • Registered ECC design offloads the controller and corrects single-bit errors on the fly
  • 1 V operation matches the platform voltage requirement for stable full-population runs
  • 288-pin RDIMM form factor fits the server slots — no UDIMM or SODIMM confusion

Exact-match server memory

This 96GB DDR5-5600 Registered ECC RDIMM is built for the Supermicro H14DST-F motherboard. It delivers the precise rank, voltage and timing the platform expects so the memory controller recognises full capacity at rated speed. The module targets administrators who need validated capacity expansion without compatibility guesswork.

Registered 2Rx4 architecture

The single specification that decides fitment is the 2Rx4 Registered organisation at 1.1V with CL46 latency. Only modules matching this exact rank structure and voltage will populate every slot at full speed on this board. A UDIMM, SODIMM or different rank configuration will not be recognised or will force reduced performance.

Kit contents and validation

The package supplies a single 96GB DDR5 5600 PC5-44800 288-pin RDIMM using major OEM Samsung, Micron or Hynix components. No heat spreader is included because registered server DIMMs rely on chassis airflow. Buyers who need multiple modules must verify population order in the motherboard manual before installation.

Přednosti

  • 96 GB capacity lets the Supermicro H14DST-F reach its maximum supported memory
  • DDR5 5600 speed with CL46 latency delivers the exact timing the board expects
  • Registered ECC design offloads the controller and corrects single-bit errors on the fly
  • 1 V operation matches the platform voltage requirement for stable full-population runs
  • 288-pin RDIMM form factor fits the server slots — no UDIMM or SODIMM confusion

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What does the 96 GB capacity mean once installed in a Supermicro H14DST-F?

The single module provides 96 GB of registered ECC memory that the board recognises at full capacity and runs at the rated DDR5 5600 speed when populated according to the manual.

How does the DDR5 5600 (PC5 44800) rating translate to real-world limits on this motherboard?

The board's memory controller will operate the RDIMM at up to 5600 MT/s with CL46 latency at 1.10 V, delivering the standard DDR5 5600 data rate supported by the platform.

What physical slot and clearance does the 288-pin RDIMM need on the H14DST-F?

It fits a standard 288-pin DDR5 RDIMM slot; the module has no heat spreader so it clears typical server heatsinks and follows the board's population order.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.