暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with gold edge connectors and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 2Rx4 CL46 1.1V 288-pin ECC RDIMM memory upgrade for Supermicro H14DST-F

SKU CH-02NV-Q9FDW

96GB DDR5 5600 RDIMM with ECC and registered architecture, CL46 at 1.1V, validated for Supermicro H14DST-F motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

他に 30点の構成を表示
  • 96 GB capacity lets the Supermicro H14DST-F reach its maximum supported memory
  • DDR5 5600 speed with CL46 latency delivers the exact timing the board expects
  • Registered ECC design offloads the controller and corrects single-bit errors on the fly
  • 1 V operation matches the platform voltage requirement for stable full-population runs
  • 288-pin RDIMM form factor fits the server slots — no UDIMM or SODIMM confusion

Exact-match server memory

This 96GB DDR5-5600 Registered ECC RDIMM is built for the Supermicro H14DST-F motherboard. It delivers the precise rank, voltage and timing the platform expects so the memory controller recognises full capacity at rated speed. The module targets administrators who need validated capacity expansion without compatibility guesswork.

Registered 2Rx4 architecture

The single specification that decides fitment is the 2Rx4 Registered organisation at 1.1V with CL46 latency. Only modules matching this exact rank structure and voltage will populate every slot at full speed on this board. A UDIMM, SODIMM or different rank configuration will not be recognised or will force reduced performance.

Kit contents and validation

The package supplies a single 96GB DDR5 5600 PC5-44800 288-pin RDIMM using major OEM Samsung, Micron or Hynix components. No heat spreader is included because registered server DIMMs rely on chassis airflow. Buyers who need multiple modules must verify population order in the motherboard manual before installation.

特長

  • 96 GB capacity lets the Supermicro H14DST-F reach its maximum supported memory
  • DDR5 5600 speed with CL46 latency delivers the exact timing the board expects
  • Registered ECC design offloads the controller and corrects single-bit errors on the fly
  • 1 V operation matches the platform voltage requirement for stable full-population runs
  • 288-pin RDIMM form factor fits the server slots — no UDIMM or SODIMM confusion

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the 96 GB capacity mean once installed in a Supermicro H14DST-F?

The single module provides 96 GB of registered ECC memory that the board recognises at full capacity and runs at the rated DDR5 5600 speed when populated according to the manual.

How does the DDR5 5600 (PC5 44800) rating translate to real-world limits on this motherboard?

The board's memory controller will operate the RDIMM at up to 5600 MT/s with CL46 latency at 1.10 V, delivering the standard DDR5 5600 data rate supported by the platform.

What physical slot and clearance does the 288-pin RDIMM need on the H14DST-F?

It fits a standard 288-pin DDR5 RDIMM slot; the module has no heat spreader so it clears typical server heatsinks and follows the board's population order.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。