Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 32GB 2x16GB CL40 1.1V Supermicro H14SST-G memory upgrade

SKU CH-SZC3-X12FA

A 32 GB DDR5 ECC RDIMM kit of two 16 GB modules at 4800 MHz CL40 1.1 V, registered for full-slot stability on Supermicro H14SST-G

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Exact-match DDR5-4800 kit runs at rated speed on Supermicro H14SST-G
  • Registered ECC RDIMM prevents silent data corruption and unplanned reboots
  • 32 GB dual-rank kit fully populates slots at rated capacity
  • 10 V CL40 modules match the board's memory controller expectations
  • 288-pin RDIMM form factor fits the motherboard's DIMM sockets precisely

Exact-match DDR5 upgrade for Supermicro H14SST-G

This 32GB kit contains two 16GB DDR5-4800 Registered ECC RDIMMs built to the board's precise rank, voltage and timing requirements. The modules install as a matched pair so the server recognises the full capacity and runs at the rated 4800 MT/s speed without manual tuning.

32GB capacity with registered ECC headroom

Two 1Rx8 modules deliver 32GB total while the registered architecture offloads the memory controller, allowing every populated slot to operate at full rated speed. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads.

288-pin RDIMM form factor decides fit

The kit uses the 288-pin Registered DIMM layout this motherboard requires; it will not work in boards that accept only UDIMM or SODIMM modules. Verify your system manual for supported capacities and population order before ordering.

Přednosti

  • Exact-match DDR5-4800 kit runs at rated speed on Supermicro H14SST-G
  • Registered ECC RDIMM prevents silent data corruption and unplanned reboots
  • 32 GB dual-rank kit fully populates slots at rated capacity
  • 10 V CL40 modules match the board's memory controller expectations
  • 288-pin RDIMM form factor fits the motherboard's DIMM sockets precisely

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will these DDR5-4800 RDIMMs work with the memory already installed in my Supermicro H14SST-G?

The H14SST-G uses DDR5 slots; this kit matches the board's required DDR5-4800 PC5-38400 1Rx8 Registered ECC spec, so it will run at the rated speed when populated per the manual.

How do I verify the kit is running at DDR5-4800 CL40 1.1V after installation?

Check the BIOS memory information screen or run a tool such as dmidecode; it should report 4800 MT/s, CAS 40 and 1.10 V for each 16 GB module.

What comes in the box and is anything else needed to use it?

The package contains the two 16 GB DDR5-4800 ECC RDIMMs; no extra parts are required beyond a compatible Supermicro H14SST-G motherboard and its documentation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.