暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 32GB 2x16GB CL40 1.1V Supermicro H14SST-G memory upgrade

SKU CH-SZC3-X12FA

A 32 GB DDR5 ECC RDIMM kit of two 16 GB modules at 4800 MHz CL40 1.1 V, registered for full-slot stability on Supermicro H14SST-G

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

他に 30点の構成を表示
  • Exact-match DDR5-4800 kit runs at rated speed on Supermicro H14SST-G
  • Registered ECC RDIMM prevents silent data corruption and unplanned reboots
  • 32 GB dual-rank kit fully populates slots at rated capacity
  • 10 V CL40 modules match the board's memory controller expectations
  • 288-pin RDIMM form factor fits the motherboard's DIMM sockets precisely

Exact-match DDR5 upgrade for Supermicro H14SST-G

This 32GB kit contains two 16GB DDR5-4800 Registered ECC RDIMMs built to the board's precise rank, voltage and timing requirements. The modules install as a matched pair so the server recognises the full capacity and runs at the rated 4800 MT/s speed without manual tuning.

32GB capacity with registered ECC headroom

Two 1Rx8 modules deliver 32GB total while the registered architecture offloads the memory controller, allowing every populated slot to operate at full rated speed. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads.

288-pin RDIMM form factor decides fit

The kit uses the 288-pin Registered DIMM layout this motherboard requires; it will not work in boards that accept only UDIMM or SODIMM modules. Verify your system manual for supported capacities and population order before ordering.

特長

  • Exact-match DDR5-4800 kit runs at rated speed on Supermicro H14SST-G
  • Registered ECC RDIMM prevents silent data corruption and unplanned reboots
  • 32 GB dual-rank kit fully populates slots at rated capacity
  • 10 V CL40 modules match the board's memory controller expectations
  • 288-pin RDIMM form factor fits the motherboard's DIMM sockets precisely

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will these DDR5-4800 RDIMMs work with the memory already installed in my Supermicro H14SST-G?

The H14SST-G uses DDR5 slots; this kit matches the board's required DDR5-4800 PC5-38400 1Rx8 Registered ECC spec, so it will run at the rated speed when populated per the manual.

How do I verify the kit is running at DDR5-4800 CL40 1.1V after installation?

Check the BIOS memory information screen or run a tool such as dmidecode; it should report 4800 MT/s, CAS 40 and 1.10 V for each 16 GB module.

What comes in the box and is anything else needed to use it?

The package contains the two 16 GB DDR5-4800 ECC RDIMMs; no extra parts are required beyond a compatible Supermicro H14SST-G motherboard and its documentation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。