Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 75mm square axial fan with 3-pin connector

OEM Industries

OEM Industries AD07512UX257300 75mm 12V 0.46A 3-pin CPU cooler

SKU CH-8QMB-4G0BQ

A 75mm 12V axial fan with ball bearing, 3800 RPM speed, 32 CFM airflow and 33.6 dBA noise level

  • ColorBlack
  • TypeFan only
  • Fan Size75mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 75 mm fan fits tight CPU sockets
  • 32 CFM airflow moves heat away from the processor
  • 3800 RPM speed with 10 % tolerance keeps cooling steady
  • 6 dBA noise level runs quietly in office builds
  • Ball bearing design extends fan life under continuous use

Compact 75 mm axial fan

This 75 mm axial fan delivers 12 V DC cooling for small-form-factor CPU sockets. It draws 0.46 A through a standard three-pin connector and fits mounting holes spaced 6.7 cm apart. The unit is intended for builders who need a low-profile replacement cooler in tight chassis.

Steady-state airflow and acoustics

At 3800 RPM with a ten percent tolerance the fan moves 32 CFM while producing 33.6 dBA. Ball-bearing construction maintains consistent speed under continuous load without the wear curve of sleeve bearings. The fixed voltage means airflow does not scale with motherboard PWM curves.

Direct three-pin installation

The three-wire connector plugs straight onto a CPU fan header; no adapter or controller is required. Mounting uses the 6.7 cm hole pattern so alignment is straightforward in compatible brackets. Builders needing PWM control or a larger heatsink surface will find this fan insufficient on its own.

Přednosti

  • 75 mm fan fits tight CPU sockets
  • 32 CFM airflow moves heat away from the processor
  • 3800 RPM speed with 10 % tolerance keeps cooling steady
  • 6 dBA noise level runs quietly in office builds
  • Ball bearing design extends fan life under continuous use

Specifikace

ModelAD07512UX257300
ColorBlack
TypeFan only
Fan Size75mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Otázky k tomuto produktu

How loud is the 75 mm fan at its rated 3800 RPM when it runs continuously?

The fan produces 33.6 dBA at its specified speed of 3800 RPM with a 10 % tolerance.

What power connection does the cooler require on the motherboard?

It uses a standard 3-pin connector and draws 0.46 A at 12 V from the CPU fan header.

Will the 6.7 cm mounting hole spacing match the retention bracket on my existing motherboard?

The cooler’s mounting holes are spaced 6.7 cm centre-to-centre; verify your board’s bracket matches that dimension before installing.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.