OEM Industries
OEM Industries AD07512UX257300 75mm 12V 0.46A 3-pin CPU cooler
A 75mm 12V axial fan with ball bearing, 3800 RPM speed, 32 CFM airflow and 33.6 dBA noise level
- ColorBlack
- TypeFan only
- Fan Size75mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- 75 mm fan fits tight CPU sockets
- 32 CFM airflow moves heat away from the processor
- 3800 RPM speed with 10 % tolerance keeps cooling steady
- 6 dBA noise level runs quietly in office builds
- Ball bearing design extends fan life under continuous use
Compact 75 mm axial fan
This 75 mm axial fan delivers 12 V DC cooling for small-form-factor CPU sockets. It draws 0.46 A through a standard three-pin connector and fits mounting holes spaced 6.7 cm apart. The unit is intended for builders who need a low-profile replacement cooler in tight chassis.
Steady-state airflow and acoustics
At 3800 RPM with a ten percent tolerance the fan moves 32 CFM while producing 33.6 dBA. Ball-bearing construction maintains consistent speed under continuous load without the wear curve of sleeve bearings. The fixed voltage means airflow does not scale with motherboard PWM curves.
Direct three-pin installation
The three-wire connector plugs straight onto a CPU fan header; no adapter or controller is required. Mounting uses the 6.7 cm hole pattern so alignment is straightforward in compatible brackets. Builders needing PWM control or a larger heatsink surface will find this fan insufficient on its own.
特長
- 75 mm fan fits tight CPU sockets
- 32 CFM airflow moves heat away from the processor
- 3800 RPM speed with 10 % tolerance keeps cooling steady
- 6 dBA noise level runs quietly in office builds
- Ball bearing design extends fan life under continuous use
仕様
| Model | AD07512UX257300 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 75mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
この商品に関する質問
How loud is the 75 mm fan at its rated 3800 RPM when it runs continuously?
The fan produces 33.6 dBA at its specified speed of 3800 RPM with a 10 % tolerance.
What power connection does the cooler require on the motherboard?
It uses a standard 3-pin connector and draws 0.46 A at 12 V from the CPU fan header.
Will the 6.7 cm mounting hole spacing match the retention bracket on my existing motherboard?
The cooler’s mounting holes are spaced 6.7 cm centre-to-centre; verify your board’s bracket matches that dimension before installing.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



