Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green circuit boards with gold edge connectors and black memory chips

OWC

OWC 16GB (2x8GB) DDR4 2666MHz CL19 ECC SODIMM 1.2V

SKU CH-R4JD-5MQ5H

16 GB dual-channel DDR4 ECC SODIMM kit at 2666 MHz CL19 for Synology DS723+ and DS923+ NAS

  • Capacity16GB (2 x 8GB)
  • Type260-Pin DDR4 SO-DIMM
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCECC
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • 16 GB dual-channel kit boosts multitasking capacity
  • DDR4 2666 MHz CL19 delivers responsive system speed
  • ECC unbuffered design protects data integrity
  • 2 V operation reduces power draw
  • Compatible with Synology DS723+ and DS923+ NAS

DDR4 2666MHz ECC SODIMM kit

This 16GB kit contains two 8GB DDR4 2666MHz CL19 ECC unbuffered SODIMM modules. It is built for Synology DiskStation DS723+ and DS923+ NAS systems that require error-correcting memory. The 260-pin form factor fits compatible micro servers, NAS appliances and POS equipment. It is not for laptops or desktops that accept only non-ECC SODIMMs.

Sustained-load behaviour

JEDEC-standard timings and 1.2V operation keep latency stable during extended file transfers or multi-user database workloads. ECC corrects single-bit errors on the fly so data integrity holds across long uptime periods. Backward compatibility with 2400MHz and 2133MHz lets the kit downclock automatically if the platform demands it. Systems needing registered DIMMs or higher frequencies cannot use this kit.

Thermals noise and power

Low-voltage DDR4 draws minimal power and produces little heat without a heat spreader. Passive cooling inside a NAS chassis is sufficient for normal operation. Silent solid-state design adds no acoustic noise to the environment. Builders who need active cooling or higher voltage headroom should look elsewhere.

Přednosti

  • 16 GB dual-channel kit boosts multitasking capacity
  • DDR4 2666 MHz CL19 delivers responsive system speed
  • ECC unbuffered design protects data integrity
  • 2 V operation reduces power draw
  • Compatible with Synology DS723+ and DS923+ NAS

Specifikace

BrandYes
Part Number2C6D41R8016P
Capacity16GB (2 x 8GB)
Type260-Pin DDR4 SO-DIMM
CAS LatencyCL19
Voltage1.2V
ECCECC
Buffered/RegisteredUnbuffered
Multi-channel KitDual-Channel
Heat SpreaderNo

Další verze tohoto modelu

Dalších 2 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How much power does the 1.2V DDR4 kit draw when the NAS runs continuously?

Each module operates at 1.2 volts, the standard DDR4 voltage, so power draw stays low even during 24/7 NAS operation.

What must the Synology DS723+ or DS923+ already have to accept this 260-pin SO-DIMM upgrade?

The NAS needs an available DDR4 SO-DIMM slot that supports 2666 MHz ECC unbuffered memory; the kit is a direct drop-in for those models.

Will the 2666 MHz CL19 modules run stably alongside existing 2400 MHz sticks in the same system?

Yes, the kit is backward compatible with 2400 MHz and 2133 MHz speeds, so it will down-clock automatically to match slower installed modules.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.