Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Two green circuit boards with gold edge connectors and black memory chips

OWC

OWC 16GB (2x8GB) DDR4 2666MHz CL19 ECC SODIMM 1.2V

SKU CH-R4JD-5MQ5H

16 GB dual-channel DDR4 ECC SODIMM kit at 2666 MHz CL19 for Synology DS723+ and DS923+ NAS

  • Capacity16GB (2 x 8GB)
  • Type260-Pin DDR4 SO-DIMM
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCECC
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

Las versiones tachadas existen, pero no están disponibles aquí.

  • 16 GB dual-channel kit boosts multitasking capacity
  • DDR4 2666 MHz CL19 delivers responsive system speed
  • ECC unbuffered design protects data integrity
  • 2 V operation reduces power draw
  • Compatible with Synology DS723+ and DS923+ NAS

DDR4 2666MHz ECC SODIMM kit

This 16GB kit contains two 8GB DDR4 2666MHz CL19 ECC unbuffered SODIMM modules. It is built for Synology DiskStation DS723+ and DS923+ NAS systems that require error-correcting memory. The 260-pin form factor fits compatible micro servers, NAS appliances and POS equipment. It is not for laptops or desktops that accept only non-ECC SODIMMs.

Sustained-load behaviour

JEDEC-standard timings and 1.2V operation keep latency stable during extended file transfers or multi-user database workloads. ECC corrects single-bit errors on the fly so data integrity holds across long uptime periods. Backward compatibility with 2400MHz and 2133MHz lets the kit downclock automatically if the platform demands it. Systems needing registered DIMMs or higher frequencies cannot use this kit.

Thermals noise and power

Low-voltage DDR4 draws minimal power and produces little heat without a heat spreader. Passive cooling inside a NAS chassis is sufficient for normal operation. Silent solid-state design adds no acoustic noise to the environment. Builders who need active cooling or higher voltage headroom should look elsewhere.

Puntos fuertes

  • 16 GB dual-channel kit boosts multitasking capacity
  • DDR4 2666 MHz CL19 delivers responsive system speed
  • ECC unbuffered design protects data integrity
  • 2 V operation reduces power draw
  • Compatible with Synology DS723+ and DS923+ NAS

Especificaciones

BrandYes
Part Number2C6D41R8016P
Capacity16GB (2 x 8GB)
Type260-Pin DDR4 SO-DIMM
CAS LatencyCL19
Voltage1.2V
ECCECC
Buffered/RegisteredUnbuffered
Multi-channel KitDual-Channel
Heat SpreaderNo

Otras versiones de este modelo

2 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

How much power does the 1.2V DDR4 kit draw when the NAS runs continuously?

Each module operates at 1.2 volts, the standard DDR4 voltage, so power draw stays low even during 24/7 NAS operation.

What must the Synology DS723+ or DS923+ already have to accept this 260-pin SO-DIMM upgrade?

The NAS needs an available DDR4 SO-DIMM slot that supports 2666 MHz ECC unbuffered memory; the kit is a direct drop-in for those models.

Will the 2666 MHz CL19 modules run stably alongside existing 2400 MHz sticks in the same system?

Yes, the kit is backward compatible with 2400 MHz and 2133 MHz speeds, so it will down-clock automatically to match slower installed modules.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.