Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green circuit boards with gold edge connectors and black memory chips

OWC

OWC 16GB (2x8GB) DDR4 2666MHz CL19 ECC SODIMM 1.2V

SKU CH-R4JD-5MQ5H

16 GB dual-channel DDR4 ECC SODIMM kit at 2666 MHz CL19 for Synology DS723+ and DS923+ NAS

  • Capacity16GB (2 x 8GB)
  • Type260-Pin DDR4 SO-DIMM
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCECC
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

Le versioni barrate esistono, ma non sono disponibili qui.

  • 16 GB dual-channel kit boosts multitasking capacity
  • DDR4 2666 MHz CL19 delivers responsive system speed
  • ECC unbuffered design protects data integrity
  • 2 V operation reduces power draw
  • Compatible with Synology DS723+ and DS923+ NAS

DDR4 2666MHz ECC SODIMM kit

This 16GB kit contains two 8GB DDR4 2666MHz CL19 ECC unbuffered SODIMM modules. It is built for Synology DiskStation DS723+ and DS923+ NAS systems that require error-correcting memory. The 260-pin form factor fits compatible micro servers, NAS appliances and POS equipment. It is not for laptops or desktops that accept only non-ECC SODIMMs.

Sustained-load behaviour

JEDEC-standard timings and 1.2V operation keep latency stable during extended file transfers or multi-user database workloads. ECC corrects single-bit errors on the fly so data integrity holds across long uptime periods. Backward compatibility with 2400MHz and 2133MHz lets the kit downclock automatically if the platform demands it. Systems needing registered DIMMs or higher frequencies cannot use this kit.

Thermals noise and power

Low-voltage DDR4 draws minimal power and produces little heat without a heat spreader. Passive cooling inside a NAS chassis is sufficient for normal operation. Silent solid-state design adds no acoustic noise to the environment. Builders who need active cooling or higher voltage headroom should look elsewhere.

Punti di forza

  • 16 GB dual-channel kit boosts multitasking capacity
  • DDR4 2666 MHz CL19 delivers responsive system speed
  • ECC unbuffered design protects data integrity
  • 2 V operation reduces power draw
  • Compatible with Synology DS723+ and DS923+ NAS

Caratteristiche tecniche

BrandYes
Part Number2C6D41R8016P
Capacity16GB (2 x 8GB)
Type260-Pin DDR4 SO-DIMM
CAS LatencyCL19
Voltage1.2V
ECCECC
Buffered/RegisteredUnbuffered
Multi-channel KitDual-Channel
Heat SpreaderNo

Altre versioni di questo modello

altri 2 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

How much power does the 1.2V DDR4 kit draw when the NAS runs continuously?

Each module operates at 1.2 volts, the standard DDR4 voltage, so power draw stays low even during 24/7 NAS operation.

What must the Synology DS723+ or DS923+ already have to accept this 260-pin SO-DIMM upgrade?

The NAS needs an available DDR4 SO-DIMM slot that supports 2666 MHz ECC unbuffered memory; the kit is a direct drop-in for those models.

Will the 2666 MHz CL19 modules run stably alongside existing 2400 MHz sticks in the same system?

Yes, the kit is backward compatible with 2400 MHz and 2133 MHz speeds, so it will down-clock automatically to match slower installed modules.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.