Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Grey ATX power supply unit with single fan and multiple power connectors

Replace Power

Replace Power 510-P137CB ATX power supply

SKU CH-JDY7-02440

ATX power supply with 20+4 pin, +12V 4-pin, 6-pin and three SATA connectors for HP Pavilion 510-P137CB desktop

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight1
  • Ready replacement for HP Pavilion 510-P137CB desktop
  • 20+4 pin ATX connector powers the motherboard
  • +12V 4-pin connector feeds the CPU
  • Three SATA connectors run drives and peripherals
  • 6-pin power connector supports add-in cards

HP Pavilion 510-P137CB replacement

This Replace Power ATX unit is built as a direct replacement for the HP Pavilion Desktop 510-P137CB. It supplies a 20+4 pin ATX connector, a +12V 4-pin power connector, three SATA connectors and a single 6-pin power connector. The grey housing contains one fan and weighs one kilogram. It is sold new and intended for owners restoring or upgrading that specific desktop.

Suits exact HP chassis only

This supply fits builders who need a like-for-like swap inside the original HP Pavilion 510-P137CB case and wiring harness. It will not suit systems that require additional PCIe power cables, modular cabling or higher total wattage than the original design. Buyers assembling custom ATX builds or needing extra SATA or GPU connectors should look at a different unit.

Standard ATX screw pattern

Installation follows the usual four-screw ATX mounting pattern used by the Pavilion chassis. The fixed cable set means all leads must be routed before the unit is secured. The single 6-pin connector can be mistaken for a PCIe plug, so verify the device you are powering matches that pin-out. Ensure the 20+4 pin and 4-pin CPU cables reach the motherboard headers without strain.

Přednosti

  • Ready replacement for HP Pavilion 510-P137CB desktop
  • 20+4 pin ATX connector powers the motherboard
  • +12V 4-pin connector feeds the CPU
  • Three SATA connectors run drives and peripherals
  • 6-pin power connector supports add-in cards

Specifikace

BrandReplace Power
ColorGrey
TypeATX
Fans1
Weight1

Otázky k tomuto produktu

Does my motherboard need a 20+4 pin ATX socket and a +12 V 4-pin connector for this PSU to fit?

Yes — the unit provides exactly one 20+4 pin ATX connector and one +12 V 4-pin connector, so both sockets must be present on the board.

Will the three SATA connectors and single 6-pin connector power my existing SATA drives and a legacy GPU that needs a 6-pin plug?

The PSU supplies three SATA power leads and one 6-pin lead, covering typical SATA storage and older graphics cards that draw auxiliary power through a 6-pin socket.

After installation, how can I confirm the PSU is delivering power correctly?

Switch the system on; the single internal fan should spin and the PC should complete POST, showing that the 20+4 pin, 4-pin, SATA and 6-pin rails are all live.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.