Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Heavy ductile-iron bench vise with 360° swivel base and anvil, silver-grey finish, four mounting bolts visible

VEVOR

VEVOR Bench Vise 5" Jaw 5" Opening 360° Swivel Anvil 9525

SKU CH-VHRD-RWCDJ

A 5-inch ductile iron bench vise with 4496 lbs clamping force, 360-degree swivel base and integrated anvil

  • 4496 lbs clamping force from ductile iron construction
  • 5" jaw width and 5" max opening handle large workpieces
  • 360° swivel base locks at any angle for flexible positioning
  • Built-in 2.17 x 2.36" anvil provides hammering and bending surface
  • Includes magnetic jaw pads with pipe capacity from .59 to 2.36

Bench Vise 5-Inch Jaw Width

The VEVOR 9525 is a heavy-duty bench vise built from ductile cast iron QT450 with carbon steel components. It delivers a clamping force of 4496 lbs (19.96 kN) for secure workpiece holding. Designed for metalworking, fabrication and general workshop tasks, it suits professionals and serious hobbyists who need a rigid, high-capacity clamping station.

360-Degree Swivel Base Operation

The locking base rotates a full 360 degrees, letting you reposition the workpiece without unclamping. Jaw width is 5 inches (127 mm) with a maximum opening of 5 inches (125 mm). Throat depth measures 2.8 inches (71 mm), limiting how deep a workpiece can sit from the jaw face. Pipe jaws accept diameters from 0.59 to 2.36 inches (15 to 60 mm).

4496 lbs Clamping Force Rating

The single figure that decides fit is the 4496 lbs (19.96 kN) clamping force. If your application demands higher holding power, this vise will not meet the requirement. For jobs within that limit, the ductile iron frame and four-bolt mounting (M10 x 50 mm bolts supplied) provide the necessary rigidity. Net weight is 17.54 lbs (7.95 kg).

Přednosti

  • 4496 lbs clamping force from ductile iron construction
  • 5" jaw width and 5" max opening handle large workpieces
  • 360° swivel base locks at any angle for flexible positioning
  • Built-in 2.17 x 2.36" anvil provides hammering and bending surface
  • Includes magnetic jaw pads with pipe capacity from .59 to 2.36

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

Should I pick the 5-inch jaw width or the 5-inch max opening for larger workpieces?

Both dimensions are 5 inches (127 mm jaw width, 125 mm max opening), so the vise handles the same width and opening range; choose based on the largest piece you need to clamp.

What does the 4496 lbs clamping force mean when I'm tightening a workpiece on the bench?

The 4496 lbs (19.96 kN) rating is the maximum force the ductile iron frame can apply, giving a very strong hold for heavy-duty metalworking or pipe clamping.

How does the 360-degree swivel base affect the way I position the vise?

The base rotates a full 360 degrees and locks in place, letting you orient the jaws to any angle without unbolting the four M10 mounting bolts.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.