نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Heavy ductile-iron bench vise with 360° swivel base and anvil, silver-grey finish, four mounting bolts visible

VEVOR

VEVOR Bench Vise 5" Jaw 5" Opening 360° Swivel Anvil 9525

SKU CH-VHRD-RWCDJ

A 5-inch ductile iron bench vise with 4496 lbs clamping force, 360-degree swivel base and integrated anvil

  • 4496 lbs clamping force from ductile iron construction
  • 5" jaw width and 5" max opening handle large workpieces
  • 360° swivel base locks at any angle for flexible positioning
  • Built-in 2.17 x 2.36" anvil provides hammering and bending surface
  • Includes magnetic jaw pads with pipe capacity from .59 to 2.36

Bench Vise 5-Inch Jaw Width

The VEVOR 9525 is a heavy-duty bench vise built from ductile cast iron QT450 with carbon steel components. It delivers a clamping force of 4496 lbs (19.96 kN) for secure workpiece holding. Designed for metalworking, fabrication and general workshop tasks, it suits professionals and serious hobbyists who need a rigid, high-capacity clamping station.

360-Degree Swivel Base Operation

The locking base rotates a full 360 degrees, letting you reposition the workpiece without unclamping. Jaw width is 5 inches (127 mm) with a maximum opening of 5 inches (125 mm). Throat depth measures 2.8 inches (71 mm), limiting how deep a workpiece can sit from the jaw face. Pipe jaws accept diameters from 0.59 to 2.36 inches (15 to 60 mm).

4496 lbs Clamping Force Rating

The single figure that decides fit is the 4496 lbs (19.96 kN) clamping force. If your application demands higher holding power, this vise will not meet the requirement. For jobs within that limit, the ductile iron frame and four-bolt mounting (M10 x 50 mm bolts supplied) provide the necessary rigidity. Net weight is 17.54 lbs (7.95 kg).

أبرز المميزات

  • 4496 lbs clamping force from ductile iron construction
  • 5" jaw width and 5" max opening handle large workpieces
  • 360° swivel base locks at any angle for flexible positioning
  • Built-in 2.17 x 2.36" anvil provides hammering and bending surface
  • Includes magnetic jaw pads with pipe capacity from .59 to 2.36

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

Should I pick the 5-inch jaw width or the 5-inch max opening for larger workpieces?

Both dimensions are 5 inches (127 mm jaw width, 125 mm max opening), so the vise handles the same width and opening range; choose based on the largest piece you need to clamp.

What does the 4496 lbs clamping force mean when I'm tightening a workpiece on the bench?

The 4496 lbs (19.96 kN) rating is the maximum force the ductile iron frame can apply, giving a very strong hold for heavy-duty metalworking or pipe clamping.

How does the 360-degree swivel base affect the way I position the vise?

The base rotates a full 360 degrees and locks in place, letting you orient the jaws to any angle without unbolting the four M10 mounting bolts.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.