Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Heavy ductile-iron bench vise with 360° swivel base and anvil, silver-grey finish, four mounting bolts visible

VEVOR

VEVOR Bench Vise 5" Jaw 5" Opening 360° Swivel Anvil 9525

SKU CH-VHRD-RWCDJ

A 5-inch ductile iron bench vise with 4496 lbs clamping force, 360-degree swivel base and integrated anvil

  • 4496 lbs clamping force from ductile iron construction
  • 5" jaw width and 5" max opening handle large workpieces
  • 360° swivel base locks at any angle for flexible positioning
  • Built-in 2.17 x 2.36" anvil provides hammering and bending surface
  • Includes magnetic jaw pads with pipe capacity from .59 to 2.36

Bench Vise 5-Inch Jaw Width

The VEVOR 9525 is a heavy-duty bench vise built from ductile cast iron QT450 with carbon steel components. It delivers a clamping force of 4496 lbs (19.96 kN) for secure workpiece holding. Designed for metalworking, fabrication and general workshop tasks, it suits professionals and serious hobbyists who need a rigid, high-capacity clamping station.

360-Degree Swivel Base Operation

The locking base rotates a full 360 degrees, letting you reposition the workpiece without unclamping. Jaw width is 5 inches (127 mm) with a maximum opening of 5 inches (125 mm). Throat depth measures 2.8 inches (71 mm), limiting how deep a workpiece can sit from the jaw face. Pipe jaws accept diameters from 0.59 to 2.36 inches (15 to 60 mm).

4496 lbs Clamping Force Rating

The single figure that decides fit is the 4496 lbs (19.96 kN) clamping force. If your application demands higher holding power, this vise will not meet the requirement. For jobs within that limit, the ductile iron frame and four-bolt mounting (M10 x 50 mm bolts supplied) provide the necessary rigidity. Net weight is 17.54 lbs (7.95 kg).

Najważniejsze cechy

  • 4496 lbs clamping force from ductile iron construction
  • 5" jaw width and 5" max opening handle large workpieces
  • 360° swivel base locks at any angle for flexible positioning
  • Built-in 2.17 x 2.36" anvil provides hammering and bending surface
  • Includes magnetic jaw pads with pipe capacity from .59 to 2.36

Specyfikacja

Na razie brak opublikowanej specyfikacji tego produktu.

Pytania dotyczące tego produktu

Should I pick the 5-inch jaw width or the 5-inch max opening for larger workpieces?

Both dimensions are 5 inches (127 mm jaw width, 125 mm max opening), so the vise handles the same width and opening range; choose based on the largest piece you need to clamp.

What does the 4496 lbs clamping force mean when I'm tightening a workpiece on the bench?

The 4496 lbs (19.96 kN) rating is the maximum force the ductile iron frame can apply, giving a very strong hold for heavy-duty metalworking or pipe clamping.

How does the 360-degree swivel base affect the way I position the vise?

The base rotates a full 360 degrees and locks in place, letting you orient the jaws to any angle without unbolting the four M10 mounting bolts.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.