暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Heavy ductile-iron bench vise with 360° swivel base and anvil, silver-grey finish, four mounting bolts visible

VEVOR

VEVOR Bench Vise 5" Jaw 5" Opening 360° Swivel Anvil 9525

SKU CH-VHRD-RWCDJ

A 5-inch ductile iron bench vise with 4496 lbs clamping force, 360-degree swivel base and integrated anvil

  • 4496 lbs clamping force from ductile iron construction
  • 5" jaw width and 5" max opening handle large workpieces
  • 360° swivel base locks at any angle for flexible positioning
  • Built-in 2.17 x 2.36" anvil provides hammering and bending surface
  • Includes magnetic jaw pads with pipe capacity from .59 to 2.36

Bench Vise 5-Inch Jaw Width

The VEVOR 9525 is a heavy-duty bench vise built from ductile cast iron QT450 with carbon steel components. It delivers a clamping force of 4496 lbs (19.96 kN) for secure workpiece holding. Designed for metalworking, fabrication and general workshop tasks, it suits professionals and serious hobbyists who need a rigid, high-capacity clamping station.

360-Degree Swivel Base Operation

The locking base rotates a full 360 degrees, letting you reposition the workpiece without unclamping. Jaw width is 5 inches (127 mm) with a maximum opening of 5 inches (125 mm). Throat depth measures 2.8 inches (71 mm), limiting how deep a workpiece can sit from the jaw face. Pipe jaws accept diameters from 0.59 to 2.36 inches (15 to 60 mm).

4496 lbs Clamping Force Rating

The single figure that decides fit is the 4496 lbs (19.96 kN) clamping force. If your application demands higher holding power, this vise will not meet the requirement. For jobs within that limit, the ductile iron frame and four-bolt mounting (M10 x 50 mm bolts supplied) provide the necessary rigidity. Net weight is 17.54 lbs (7.95 kg).

特長

  • 4496 lbs clamping force from ductile iron construction
  • 5" jaw width and 5" max opening handle large workpieces
  • 360° swivel base locks at any angle for flexible positioning
  • Built-in 2.17 x 2.36" anvil provides hammering and bending surface
  • Includes magnetic jaw pads with pipe capacity from .59 to 2.36

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Should I pick the 5-inch jaw width or the 5-inch max opening for larger workpieces?

Both dimensions are 5 inches (127 mm jaw width, 125 mm max opening), so the vise handles the same width and opening range; choose based on the largest piece you need to clamp.

What does the 4496 lbs clamping force mean when I'm tightening a workpiece on the bench?

The 4496 lbs (19.96 kN) rating is the maximum force the ductile iron frame can apply, giving a very strong hold for heavy-duty metalworking or pipe clamping.

How does the 360-degree swivel base affect the way I position the vise?

The base rotates a full 360 degrees and locks in place, letting you orient the jaws to any angle without unbolting the four M10 mounting bolts.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。