BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277988BTC
Auf Lager
LORDWORLD
LORDWORLD LX-16A Serial Bus Servo Dual Bearing Full Metal Gear 17kg.cm 240°
Serial bus servo with dual ball bearings and full metal gears delivers 17 kg·cm torque at 7.4 V with 240° control angle and real-time position, temperature, voltage feedback
- High torque for demanding robots with 17 kg/cm at 7.4 V
- Real-time position, temperature and voltage feedback simplifies debugging
- Warning light blinks on overcurrent, overtemperature or locked-rotor events
- Full metal gears and dual ball bearings extend service life and accuracy
- Daisy-chain serial wiring reduces I/O ports and keeps builds tidy
High-Torque Serial Bus Servo
The LORDWORLD LX-16A is a serial bus servo built with full metal gears and dual ball bearings. It delivers 17 kg.cm of torque at 7.4 V and 15 kg.cm at 6.6 V. Real-time feedback reports position, temperature and voltage, while a top-mounted warning light signals overcurrent, overheating or locked-rotor conditions. The control angle spans 240°.
Suited For Robot Builders And Makers
This servo suits hobbyists and developers assembling RC robots or DIY automation projects that need accurate positioning with simple daisy-chain wiring. The serial interface reduces the number of I/O ports required on the controller. Builders needing continuous rotation or a control range beyond 240° should look at other actuator types.
240° Control Angle With Serial Daisy-Chain
The single specification that decides fit is the 240° control angle combined with the serial bus daisy-chain topology. If your mechanism requires a wider rotation range or a traditional PWM connection, this unit will not match the mechanical or wiring requirements.
Besonderheiten
- High torque for demanding robots with 17 kg/cm at 7.4 V
- Real-time position, temperature and voltage feedback simplifies debugging
- Warning light blinks on overcurrent, overtemperature or locked-rotor events
- Full metal gears and dual ball bearings extend service life and accuracy
- Daisy-chain serial wiring reduces I/O ports and keeps builds tidy
Technische Daten
| Brand | LORDWORLD |
|---|
Fragen zu diesem Artikel
What mounting dimensions does the LX-16A servo require?
The servo uses a standard serial bus dual-interface connector, allowing daisy-chain wiring from a single I/O port on the control board.
How do I install the LX-16A servo, and what step is often missed?
Connect the servo in series via the dual interface, then apply 6.6 V or 7.4 V; the top warning LED will blink if overcurrent, over-temperature or locked-rotor occurs, confirming correct setup.
What maintenance will the LX-16A servo need over time?
The full metal gears and dual ball bearings are rated for extended service life; monitor the real-time position, temperature and voltage feedback to detect wear early.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
