NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR5 6400 CL52 2Rx4 ECC Registered RDIMM memory upgrade
- 128GB (4 x 32GB)
- 288-Pin DDR5 RDIMM
4.535,99 $
0.05804433BTC
Auf Lager
NEMIX RAM
NEMIX RAM 128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V CL52 288-PIN ECC RDIMM memory upgrade
128GB DDR5 6400MHz registered ECC server module with 4Rx4 rank, CL52 latency, 1.1V operation, and 288-pin RDIMM form factor validated for Supermicro X14SDW-42C-SP9F motherboards
- Capacity128GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 128 GB capacity for high-density server workloads
- DDR5 6400 speed rated at PC5-51200 bandwidth
- CL52 latency at 1.1 V operating voltage
- 4Rx4 registered ECC architecture for error correction
- 288-pin RDIMM form factor matches Supermicro X14SDW-42C-SP9F
Exact-fit server memory
This 128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V CL52 288-pin ECC RDIMM is built for the Supermicro X14SDW-42C-SP9F motherboard. The registered architecture and ECC function match the board's memory controller requirements so every slot can be populated at the rated speed.
Replacing slower or smaller modules
Upgrade from lower-capacity DDR5 RDIMMs when your workload needs the full 128GB per module at 6400MHz without down-clocking. The jump is worth it when the manual confirms this exact rank, voltage and timing combination for full population.
Build integration
The 288-pin RDIMM form factor fits the Supermicro X14SDW-42C-SP9F memory slots directly — no UDIMM or SODIMM alternative will seat correctly. Registered buffering offloads the memory controller, freeing electrical margin for dense population across all channels.
Besonderheiten
- 128 GB capacity for high-density server workloads
- DDR5 6400 speed rated at PC5-51200 bandwidth
- CL52 latency at 1.1 V operating voltage
- 4Rx4 registered ECC architecture for error correction
- 288-pin RDIMM form factor matches Supermicro X14SDW-42C-SP9F
Technische Daten
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-744K1 |
| Capacity | 128GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
Andere Versionen dieses Modells
5 weitere aus dieser Serie
Gleiche Familie, unterschiedlicher Speicher, Kühler oder Takt — vergleichen Sie, bevor Sie sich entscheiden.
NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR5 6400 ECC RDIMM Supermicro X14SDV-32C-SP3F memory upgrade
- 128GB (4 x 32GB)
- 288-Pin DDR5 RDIMM
4.537,99 $
0.05806992BTC
Auf Lager
NEMIX RAM
NEMIX RAM 128GB 2x64GB DDR5 6400 CL52 4Rx4 ECC RDIMM Supermicro X14SDV-32C-SP3F memory upgrade
- 128GB (2 x 64GB)
- 288-Pin DDR5 RDIMM
4.592,99 $
0.05877372BTC
Auf Lager
NEMIX RAM
NEMIX RAM DDR5 6400 128GB 2x64GB CL52 4Rx4 1.1V RDIMM ECC Supermicro X14SDW-36C-SP9F memory upgrade
- 128GB (2 x 64GB)
- 288-Pin DDR5 RDIMM
4.613,99 $
0.05904245BTC
Auf Lager
NEMIX RAM
NEMIX RAM 128GB DDR5 6400MHz 4Rx4 CL52 ECC Registered RDIMM memory upgrade
- 128GB
- 288-Pin DDR5 RDIMM
4.631,99 $
0.05927278BTC
Auf LagerFragen zu diesem Artikel
Will this 288-pin DDR5 RDIMM fit the memory slots on my Supermicro X14SDW-42C-SP9F motherboard?
Yes, the module uses the 288-pin RDIMM form factor required by that board. It is not a UDIMM or SODIMM, so it matches the slot keying and electrical interface exactly.
What is the correct installation sequence for this 4Rx4 registered ECC module on the X14SDW-42C-SP9F?
Consult the motherboard manual for the approved DIMM population order. Registered modules must be installed in the specific slot sequence the board expects, otherwise the system will not recognise the full 128 GB capacity.
Does the lack of a heat spreader on this 1.1 V DDR5 module mean I need to add active cooling later?
The module runs at the standard 1.1 V DDR5 voltage without a spreader. In a server chassis with normal airflow this is sufficient; additional cooling is only needed if your enclosure restricts air movement over the DIMM slots.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501606BTC
Auf Lager
