我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular DDR5 RDIMM module with black memory chips and gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V CL52 288-PIN ECC RDIMM memory upgrade

SKU CH-9V0G-S5KJQ

128GB DDR5 6400MHz registered ECC server module with 4Rx4 rank, CL52 latency, 1.1V operation, and 288-pin RDIMM form factor validated for Supermicro X14SDW-42C-SP9F motherboards

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 128GB

  • 128 GB capacity for high-density server workloads
  • DDR5 6400 speed rated at PC5-51200 bandwidth
  • CL52 latency at 1.1 V operating voltage
  • 4Rx4 registered ECC architecture for error correction
  • 288-pin RDIMM form factor matches Supermicro X14SDW-42C-SP9F

Exact-fit server memory

This 128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V CL52 288-pin ECC RDIMM is built for the Supermicro X14SDW-42C-SP9F motherboard. The registered architecture and ECC function match the board's memory controller requirements so every slot can be populated at the rated speed.

Replacing slower or smaller modules

Upgrade from lower-capacity DDR5 RDIMMs when your workload needs the full 128GB per module at 6400MHz without down-clocking. The jump is worth it when the manual confirms this exact rank, voltage and timing combination for full population.

Build integration

The 288-pin RDIMM form factor fits the Supermicro X14SDW-42C-SP9F memory slots directly — no UDIMM or SODIMM alternative will seat correctly. Registered buffering offloads the memory controller, freeing electrical margin for dense population across all channels.

商品特色

  • 128 GB capacity for high-density server workloads
  • DDR5 6400 speed rated at PC5-51200 bandwidth
  • CL52 latency at 1.1 V operating voltage
  • 4Rx4 registered ECC architecture for error correction
  • 288-pin RDIMM form factor matches Supermicro X14SDW-42C-SP9F

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will this 288-pin DDR5 RDIMM fit the memory slots on my Supermicro X14SDW-42C-SP9F motherboard?

Yes, the module uses the 288-pin RDIMM form factor required by that board. It is not a UDIMM or SODIMM, so it matches the slot keying and electrical interface exactly.

What is the correct installation sequence for this 4Rx4 registered ECC module on the X14SDW-42C-SP9F?

Consult the motherboard manual for the approved DIMM population order. Registered modules must be installed in the specific slot sequence the board expects, otherwise the system will not recognise the full 128 GB capacity.

Does the lack of a heat spreader on this 1.1 V DDR5 module mean I need to add active cooling later?

The module runs at the standard 1.1 V DDR5 voltage without a spreader. In a server chassis with normal airflow this is sufficient; additional cooling is only needed if your enclosure restricts air movement over the DIMM slots.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。