OWC
OWC 16GB DDR4 3200 ECC Registered RDIMM CL22 2Rx8 1.2V 288-pin
- 16GB
- 288-Pin DDR4 ECC RD…
105,99 $
0.00135742BTC
Auf Lager
OWC
OWC 8GB DDR5 4800 CL40 262-pin SODIMM memory upgrade for OptiPlex 7000 XE Micro 7010 Micro Plus
8 GB DDR5-4800 SODIMM module for OptiPlex 7000 XE Micro and 7010 Micro Plus
- Capacity8GB
- Type262-Pin DDR5 Non-ECC SODIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.1V
- ECCNo
- 8GB DDR5 4800 MHz boosts multitasking responsiveness
- CL40 latency at 1.1V lowers power draw
- 262-pin SODIMM fits OptiPlex 7000 XE Micro and 7010 Micro Plus
- JEDEC and RoHS compliant for warranty-safe upgrades
- Replaces Dell part numbers AB949333 SNPMVK8PC/8G
8GB DDR5 4800 SODIMM for OptiPlex Micro
This OWC module adds 8GB of DDR5 memory to compatible Dell OptiPlex systems. It runs at 4800 MT/s with CL40 latency at 1.1V. The 262-pin SODIMM fits the 7000 XE Micro and 7010 Micro Plus. It is an unbuffered, non-ECC 1Rx16 design without a heat spreader.
Suits single-slot upgrades on supported OptiPlex
Builders expanding a 7000 XE Micro or 7010 Micro Plus with one module will find this part validated for those chassis. Systems requiring ECC, registered DIMMs, or a different pin count cannot use this module. Buyers needing higher capacity per slot or a dual-rank configuration should look at other options.
4800 MT/s JEDEC speed with CL40 timing
The module operates at the standard DDR5 4800 data rate (PC5-38400) with a CAS latency of 40 cycles. This speed and timing are fixed by the JEDEC profile on the SPD. No higher frequency or tighter latency is programmed on this stick.
Besonderheiten
- 8GB DDR5 4800 MHz boosts multitasking responsiveness
- CL40 latency at 1.1V lowers power draw
- 262-pin SODIMM fits OptiPlex 7000 XE Micro and 7010 Micro Plus
- JEDEC and RoHS compliant for warranty-safe upgrades
- Replaces Dell part numbers AB949333 SNPMVK8PC/8G
Technische Daten
| Brand | OWC |
|---|---|
| Part Number | 4S8D51R608GB |
| Capacity | 8GB |
| Type | 262-Pin DDR5 Non-ECC SODIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx16 |
| Heat Spreader | No |
| Compatible System | Dell OptiPlex 7000 XE Micro Dell OptiPlex 7010 Micro Plus |
Andere Versionen dieses Modells
5 weitere aus dieser Serie
Gleiche Familie, unterschiedlicher Speicher, Kühler oder Takt — vergleichen Sie, bevor Sie sich entscheiden.
OWC
OWC 16GB DDR4 2666 CL19 ECC UDIMM 2Rx8 1.2V 288-pin memory upgrade
- 16GB
- 288-Pin DDR4 ECC UD…
118,99 $
0.00152391BTC
Auf Lager
OWC
OWC 16GB DDR4 3200 ECC UDIMM CL22 1Rx8 1.2V 288-pin memory upgrade
- 16GB
- 288-Pin DDR4 ECC UD…
119,99 $
0.00153672BTC
Auf Lager
OWC
OWC 8GB DDR5 4800 CL40 1Rx16 288-pin 1.1V UDIMM for XPS 8950
- 8GB
- 288-Pin DDR5 Non-EC…
125,99 $
0.00161356BTC
Auf Lager
OWC
OWC 8GB DDR5 4800 CL40 1Rx16 SODIMM memory upgrade
- 8GB
- 262-Pin DDR5 Non-EC…
126,99 $
0.00162637BTC
Auf LagerFragen zu diesem Artikel
How hot does the 1.1 V DDR5 module run during continuous workloads?
The module operates at the standard 1.1 V DDR5 voltage with no heat spreader, so thermals depend on the OptiPlex 7000 XE Micro or 7010 Micro Plus chassis airflow.
What is the sustained power draw of the 8 GB CL40 SODIMM under load?
At 1.1 V the 1Rx16 DDR5 4800 module draws only a few watts; the OptiPlex Micro power supply handles it without extra connectors.
Which slot keying must the OptiPlex 7000 XE Micro or 7010 Micro Plus provide for this 262-pin SODIMM?
The system needs a standard DDR5 262-pin SODIMM slot; the module is a direct replacement for Dell part numbers AB949333 and SNPMVK8PC/8G.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00502024BTC
Auf Lager
