Thermal Grizzly
Thermal Grizzly TG-MP-HC-120-100-20-2 Minus Pad 120x100x2.0mm 2-Pack thermal pad
High-compression thermal pad pair measuring 120x100x2.0 mm bridges uneven gaps on GPUs and SSDs while maintaining conductivity under pressure
- FeaturesThe thermal pads of the Minus Pad High Compression series of
- Bridges varying component heights with a single pad thanks to very high compressibility
- Maintains strong thermal transfer even under heavy compression for reliable cooling
- Electrically non-conductive design prevents short circuits on sensitive VRAM and VRM areas
- Suits GPU water-block conversions and cooler repads where exact gap thickness is unknown
- Supplied as two 120x100x2.0mm pads for multiple component coverage
High-compression thermal pad 120×100×2.0 mm
The Thermal Grizzly Minus Pad High Compression comes in a two-pack of 120 by 100 millimetre sheets with a 2.0 millimetre thickness. Very high compressibility lets a single pad bridge different component heights at once. The material is electrically non-conductive for safe use on exposed circuitry.
Replacing standard pads of uncertain thickness
When the exact gap height is unknown, these pads can be chosen slightly thicker than the originals and will compress to fit. Thermal conductivity is maintained and can increase under higher contact pressure. The design suits GPU water-block conversions and cooler re-pads where VRAM, VRMs and the die sit at different levels.
Handles mixed-height stacks on one sheet
A single pad covers memory chips, voltage regulators and the GPU die simultaneously, accommodating the height tolerances between them. It runs out when the required compression exceeds the material’s elastic limit or when a larger surface area than 120 by 100 millimetres is needed.
Besonderheiten
- Bridges varying component heights with a single pad thanks to very high compressibility
- Maintains strong thermal transfer even under heavy compression for reliable cooling
- Electrically non-conductive design prevents short circuits on sensitive VRAM and VRM areas
- Suits GPU water-block conversions and cooler repads where exact gap thickness is unknown
- Supplied as two 120x100x2.0mm pads for multiple component coverage
Technische Daten
| Brand | Thermal Grizzly |
|---|---|
| Model | TG-MP-HC-120-100-20-2 |
| Part Number | TG-MP-HC-120-100-20-2 |
| Features | The thermal pads of the Minus Pad High Compression series offer extremely high compressibility combined with excellent thermal conductivity. They are especially practical when converting a graphics card to a water cooler, as a single pad thickness can be used across various contact points. |
Fragen zu diesem Artikel
What are the exact dimensions of each pad in the 2-pack?
Each pad measures 120 mm by 100 mm with a thickness of 2.0 mm.
How should the Minus Pad High Compression be installed on a GPU, and what common mistake should be avoided?
Remove the protective films, place the pad on the component, and let the cooler's mounting pressure compress it; do not pre-compress or stretch the pad by hand.
Will the thermal pads need replacement after extended use, and what indicates they are worn?
The pads are designed for long-term stability and do not dry out; replace only if physical damage occurs or if temperatures rise unexpectedly after years of service.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 $
0.0005154BTC
Auf Lager