我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two grey thermal pads 120 by 100 by 2.0 mm

Thermal Grizzly

Thermal Grizzly TG-MP-HC-120-100-20-2 Minus Pad 120x100x2.0mm 2-Pack thermal pad

SKU CH-YZZN-GTJ8E

High-compression thermal pad pair measuring 120x100x2.0 mm bridges uneven gaps on GPUs and SSDs while maintaining conductivity under pressure

  • FeaturesThe thermal pads of the Minus Pad High Compression series of
  • Bridges varying component heights with a single pad thanks to very high compressibility
  • Maintains strong thermal transfer even under heavy compression for reliable cooling
  • Electrically non-conductive design prevents short circuits on sensitive VRAM and VRM areas
  • Suits GPU water-block conversions and cooler repads where exact gap thickness is unknown
  • Supplied as two 120x100x2.0mm pads for multiple component coverage

High-compression thermal pad 120×100×2.0 mm

The Thermal Grizzly Minus Pad High Compression comes in a two-pack of 120 by 100 millimetre sheets with a 2.0 millimetre thickness. Very high compressibility lets a single pad bridge different component heights at once. The material is electrically non-conductive for safe use on exposed circuitry.

Replacing standard pads of uncertain thickness

When the exact gap height is unknown, these pads can be chosen slightly thicker than the originals and will compress to fit. Thermal conductivity is maintained and can increase under higher contact pressure. The design suits GPU water-block conversions and cooler re-pads where VRAM, VRMs and the die sit at different levels.

Handles mixed-height stacks on one sheet

A single pad covers memory chips, voltage regulators and the GPU die simultaneously, accommodating the height tolerances between them. It runs out when the required compression exceeds the material’s elastic limit or when a larger surface area than 120 by 100 millimetres is needed.

商品特色

  • Bridges varying component heights with a single pad thanks to very high compressibility
  • Maintains strong thermal transfer even under heavy compression for reliable cooling
  • Electrically non-conductive design prevents short circuits on sensitive VRAM and VRM areas
  • Suits GPU water-block conversions and cooler repads where exact gap thickness is unknown
  • Supplied as two 120x100x2.0mm pads for multiple component coverage

商品規格

BrandThermal Grizzly
ModelTG-MP-HC-120-100-20-2
Part NumberTG-MP-HC-120-100-20-2
FeaturesThe thermal pads of the Minus Pad High Compression series offer extremely high compressibility combined with excellent thermal conductivity. They are especially practical when converting a graphics card to a water cooler, as a single pad thickness can be used across various contact points.

商品問答

What are the exact dimensions of each pad in the 2-pack?

Each pad measures 120 mm by 100 mm with a thickness of 2.0 mm.

How should the Minus Pad High Compression be installed on a GPU, and what common mistake should be avoided?

Remove the protective films, place the pad on the component, and let the cooler's mounting pressure compress it; do not pre-compress or stretch the pad by hand.

Will the thermal pads need replacement after extended use, and what indicates they are worn?

The pads are designed for long-term stability and do not dry out; replace only if physical damage occurs or if temperatures rise unexpectedly after years of service.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。