Wir akzeptieren Kryptowährungen — so können die Coins, die Sie besitzen, echte Hardware kaufen.Zahlen Sie mit Krypto, geben Sie sie für echte Hardware aus. Weltweit kostenloser versicherter Versand ab 399 $. Neutrale Kartons ohne Markenaufdruck, versendet aus Deutschland.Kostenloser versicherter Versand ab 399 $. Ihr Kurs wird 30 Minuten lang gesperrt, sobald die Kasse geöffnet wird.Kurs 30 Minuten gesperrt. Jeder Artikel ist versiegelt, die Seriennummer wird geprüft, und es gilt eine Garantie von 24 Monaten.Versiegelt, 24 Monate Garantie.

Gemerkte Artikel Anmelden
Small black 60 by 15 mm square case fan with two wires

Zyvpee

Zyvpee KDE1206PHV3 60x15mm 12V 0.6W 2-pin case fan

SKU CH-D2K0-Q0X1R

A 60 mm by 15 mm maglev case fan running on 12 V at 0.6 W with a 2-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeMaglev
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for quiet operation
  • 12 V DC input draws only .6 W of power
  • Compact 60 x 15 mm frame fits tight chassis spaces
  • Simple 2-pin connector enables quick installation
  • Black non-LED design keeps build aesthetics clean

60 mm Maglev case fan

The Zyvpee KDE1206PHV3 is a 60 by 15 millimetre DC fan that runs on 12 volts and draws 0.6 watts through a two-pin connector. Its Maglev bearing reduces friction for quieter operation. The black, non-LED frame suits standard case mounting points. It is built for compact chassis airflow.

Suits tight builds needing low power draw

This fan fits small-form-factor cases and replacement spots where a 60 mm frame is required. The two-pin header offers only voltage control, so builders who need PWM speed curves should look elsewhere. Systems demanding higher static pressure or larger diameters will need a different model.

Steady airflow with minimal vibration

Under continuous load the Maglev bearing maintains consistent rotation without the wear of sleeve or ball designs. The 0.6 watt draw keeps heat contribution low during extended runs. Expect stable RPM and noise levels once the motor settles. The square frame aligns securely for sustained vibration-free cooling.

Besonderheiten

  • Maglev bearing reduces friction for quiet operation
  • 12 V DC input draws only .6 W of power
  • Compact 60 x 15 mm frame fits tight chassis spaces
  • Simple 2-pin connector enables quick installation
  • Black non-LED design keeps build aesthetics clean

Technische Daten

SeriesKDE1204PKV3
ModelKDE1206PHV3
TypeCase Fan
CompatibilityCase
Bearing TypeMaglev
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*15mm

Fragen zu diesem Artikel

What power connector does my motherboard or fan controller need to run this 2-pin 12V fan?

The fan uses a standard 2-pin connector that plugs into any 12 V DC fan header on a motherboard or a compatible fan controller.

Will the 60 mm by 15 mm frame fit alongside the 120 mm fans already in my case?

Yes, the 60x15 mm footprint is much smaller than a 120 mm fan, so it can occupy tight spots such as VRM heatsinks, chipset coolers or narrow drive cages without interfering with larger fans.

How can I confirm the Maglev bearing is spinning correctly after installation?

Power the system and listen for smooth, quiet rotation; the magnetic levitation bearing should run without grinding or rattling, and you can verify RPM in BIOS or monitoring software if the header supports speed reporting.

Ebenfalls in dieser Kategorie

Kunden haben diese ebenfalls verglichen

Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.