Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Small black 60 by 15 mm square case fan with two wires

Zyvpee

Zyvpee KDE1206PHV3 60x15mm 12V 0.6W 2-pin case fan

SKU CH-D2K0-Q0X1R

A 60 mm by 15 mm maglev case fan running on 12 V at 0.6 W with a 2-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeMaglev
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for quiet operation
  • 12 V DC input draws only .6 W of power
  • Compact 60 x 15 mm frame fits tight chassis spaces
  • Simple 2-pin connector enables quick installation
  • Black non-LED design keeps build aesthetics clean

60 mm Maglev case fan

The Zyvpee KDE1206PHV3 is a 60 by 15 millimetre DC fan that runs on 12 volts and draws 0.6 watts through a two-pin connector. Its Maglev bearing reduces friction for quieter operation. The black, non-LED frame suits standard case mounting points. It is built for compact chassis airflow.

Suits tight builds needing low power draw

This fan fits small-form-factor cases and replacement spots where a 60 mm frame is required. The two-pin header offers only voltage control, so builders who need PWM speed curves should look elsewhere. Systems demanding higher static pressure or larger diameters will need a different model.

Steady airflow with minimal vibration

Under continuous load the Maglev bearing maintains consistent rotation without the wear of sleeve or ball designs. The 0.6 watt draw keeps heat contribution low during extended runs. Expect stable RPM and noise levels once the motor settles. The square frame aligns securely for sustained vibration-free cooling.

Najważniejsze cechy

  • Maglev bearing reduces friction for quiet operation
  • 12 V DC input draws only .6 W of power
  • Compact 60 x 15 mm frame fits tight chassis spaces
  • Simple 2-pin connector enables quick installation
  • Black non-LED design keeps build aesthetics clean

Specyfikacja

SeriesKDE1204PKV3
ModelKDE1206PHV3
TypeCase Fan
CompatibilityCase
Bearing TypeMaglev
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*15mm

Pytania dotyczące tego produktu

What power connector does my motherboard or fan controller need to run this 2-pin 12V fan?

The fan uses a standard 2-pin connector that plugs into any 12 V DC fan header on a motherboard or a compatible fan controller.

Will the 60 mm by 15 mm frame fit alongside the 120 mm fans already in my case?

Yes, the 60x15 mm footprint is much smaller than a 120 mm fan, so it can occupy tight spots such as VRM heatsinks, chipset coolers or narrow drive cages without interfering with larger fans.

How can I confirm the Maglev bearing is spinning correctly after installation?

Power the system and listen for smooth, quiet rotation; the magnetic levitation bearing should run without grinding or rattling, and you can verify RPM in BIOS or monitoring software if the header supports speed reporting.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.