Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Green 240-pin DDR3L server DIMM with black chips and gold contacts

A-Tech

A-Tech 16GB DDR3L 1333 ECC RDIMM 4Rx8 Server Memory

SKU CH-2VX2-M4Y3R

16 GB DDR3L 1333 MHz ECC registered DIMM with 4Rx8 organisation for server and workstation upgrades

  • Capacity16GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR3L 1333 MHz capacity supports heavy server workloads
  • ECC registered design detects and corrects data errors automatically
  • 35 V low-voltage operation reduces power draw and heat
  • 240-pin DIMM form factor fits standard DDR3 server slots
  • Tested compatible replacement for Kingston KTD-PE313Q8LV/16G and KTD-PE313Q8LVK3/48G

Compatible DDR3L 1333 ECC Registered Module

This A-Tech 16GB DDR3L 1333 ECC RDIMM is a server-grade memory module built for systems that require registered error-correcting code memory. It operates at 1.35V with a CAS latency of CL9 and uses a 240-pin DIMM form factor. The module is designed as a direct replacement for specific Kingston part numbers including KTD-PE313Q8LV/16G.

Suited for Registered ECC Server Upgrades

This module suits administrators upgrading or repairing servers and workstations that specifically require DDR3L registered ECC memory with a 4Rx8 organisation. It will not work in platforms that accept only unbuffered non-ECC UDIMMs or those that require a different voltage, pin count, or rank configuration. Buyers needing higher density per slot or a different speed grade should look elsewhere.

4Rx8 Organisation Defines Platform Fit

The single specification that decides compatibility is the 4Rx8 rank architecture combined with registered ECC operation at 1.35V. Your system documentation must explicitly list support for 4Rx8 DDR3L RDIMMs at 1333 MHz; otherwise the module will not be recognised or will cause boot failure. Verify the exact memory qualification list before purchasing.

Puntos fuertes

  • 16 GB DDR3L 1333 MHz capacity supports heavy server workloads
  • ECC registered design detects and corrects data errors automatically
  • 35 V low-voltage operation reduces power draw and heat
  • 240-pin DIMM form factor fits standard DDR3 server slots
  • Tested compatible replacement for Kingston KTD-PE313Q8LV/16G and KTD-PE313Q8LVK3/48G

Especificaciones

BrandA-Tech
Capacity16GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Preguntas sobre este artículo

How much heat and power does this 1.35 V DDR3L 1333 RDIMM generate under continuous load?

The module runs at 1.35 V, the standard low voltage for DDR3L, which reduces power draw and heat compared to 1.5 V DDR3. Actual thermals depend on server airflow and total DIMM population.

What motherboard slot and chipset support do I need to install this 240-pin registered ECC module?

You need a server or workstation board with 240-pin DDR3 DIMM slots that accept registered ECC RDIMMs. The memory controller must support DDR3L 1333 at 1.35 V.

Will this 4Rx8 DDR3L RDIMM work in a system that currently uses 2Rx4 or 2Rx8 DDR3L registered DIMMs?

Mixing 4Rx8 with 2Rx4 or 2Rx8 modules is possible only if the platform's memory controller and BIOS support mixed-rank populations. Check the system's qualified-vendor list before combining ranks.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.