Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 32GB DDR4 2400 MHz ECC LRDIMM 2Rx4 288-Pin Server RAM

SKU CH-EQS7-N0Y6Q

32 GB DDR4-2400 ECC Load-Reduced DIMM with CL17 latency and 1.2 V operation for server and workstation memory expansion

  • Capacity32GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced

Capacity 32GB

  • 32 GB capacity handles large server workloads
  • DDR4 2400 MHz speed delivers fast data throughput
  • ECC Load Reduced DIMM protects data integrity
  • 2Rx4 dual-rank organisation increases memory density
  • 20 V standard voltage ensures efficient operation

Server ECC LRDIMM Module

This A-Tech module provides 32GB of DDR4 ECC Load Reduced memory for compatible servers and workstations. It operates at 2400 MHz with a CAS latency of 17 and runs at the standard 1.20V voltage. The dual-rank 2Rx4 organisation uses major-brand chips to deliver registered, error-correcting performance for multi-socket platforms.

288-Pin Registered Form Factor

The 288-pin DIMM fits only DDR4 server and workstation boards that explicitly support LRDIMM technology; it will not work in desktop or laptop systems. Load Reduced buffering reduces electrical load on the memory controller, allowing higher capacities per channel in dense configurations. Verify your system manual for correct slot population and channel guidelines before installation.

Standard Voltage Thermals

Running at 1.2V keeps power draw in line with baseline DDR4 specifications for typical server workloads. The module is validated through A-Tech quality assurance testing to maintain reliable operation under sustained load. Passive cooling via chassis airflow is sufficient for normal use; no additional voltage or frequency headroom is implied.

Puntos fuertes

  • 32 GB capacity handles large server workloads
  • DDR4 2400 MHz speed delivers fast data throughput
  • ECC Load Reduced DIMM protects data integrity
  • 2Rx4 dual-rank organisation increases memory density
  • 20 V standard voltage ensures efficient operation

Especificaciones

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 32GB 2Rx4 PC4-2400T-L
Capacity32GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank2Rx4 (2DRx4)
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Does the PC4-19200 DDR4 2400 MHz rating determine the maximum bandwidth the module can deliver in a server?

The module runs at DDR4 2400 MHz with a PC4-19200 rating and CL17 latency, so its peak transfer rate is set by that specification and the server's memory controller.

Will this 288-pin LRDIMM fit in a standard DDR4 server DIMM slot and what clearance does it need?

It uses the 288-pin DDR4 DIMM form factor and is a Load Reduced ECC module; it fits standard DDR4 server slots but must be installed in systems that specifically support LRDIMM memory.

How is the module installed and what seating step do builders often miss?

Align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, and verify the system's channel population rules for dual-rank LRDIMMs.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.