NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
A-Tech
32 GB DDR4 2666 ECC unbuffered DIMM with CL19 latency and 1.2 V operation
This 32GB DDR4 2666 ECC UDIMM module targets server and workstation builds that require error-correcting unbuffered memory. It replaces the Hynix HMAA4GU7AJR8N-VK part and fits standard 288-pin DDR4 DIMM slots. Systems needing registered DIMMs or non-ECC memory cannot use this module.
Operating at the standard DDR4 voltage of 1.20V, the module draws minimal power and generates low heat inside a server chassis. Passive airflow across the DIMM is sufficient for normal workloads, and no active cooling or additional fan headers are required.
The module runs at DDR4 2666 (PC4-21300) with a CAS latency of 19. This timing figure determines whether the memory matches the platform's supported speed grade and latency requirements for stable operation.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Power off the system, open the chassis, align the notch on the 288-pin DDR4 module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 32 GB stick is detected at 2666 MHz with ECC active.
No routine maintenance is required; keep air vents clear so the 1.20 V modules stay cool, and replace only if memory diagnostics report uncorrectable ECC errors or the system fails to POST with the module installed.
The CAS latency of 19 cycles at 2666 MHz sets the baseline response time; under continuous workloads the memory controller will hit this timing ceiling before thermal throttling becomes a factor at the standard 1.20 V operating voltage.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?