A-Tech
A-Tech 32GB DDR4 2666MHz ECC SODIMM 2Rx8 CL19 1.20V laptop RAM
A 32 GB DDR4 2666 MHz ECC SODIMM module with CL19 latency and 1.20 V operation for compatible laptops and workstations
- Capacity32GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.20V
- ECCYes
- 32 GB capacity handles heavy multitasking and large datasets
- DDR4 2666 MHz speed delivers fast data transfer rates
- ECC unbuffered design detects and corrects memory errors
- CL19 latency with 1.20 V voltage balances performance and efficiency
- 260-pin SODIMM form factor fits compatible laptop and workstation slots
High-capacity DDR4 ECC SODIMM for servers
This 32GB DDR4 2666MHz module targets administrators upgrading workstation or server laptops that require error-correcting memory. The unbuffered design fits standard 260-pin SO-DIMM slots while the CL19 timing and 1.20V voltage match mainstream DDR4 specifications. Buyers needing non-ECC or lower-capacity sticks should look elsewhere.
Fits 260-pin DDR4 SO-DIMM slots with ECC support
The module installs directly into compatible laptop or compact server boards that accept unbuffered ECC SO-DIMMs. It frees the system from single-channel constraints by delivering a full 32GB in one slot, leaving additional sockets open for further expansion. Systems without ECC capability in the chipset or BIOS cannot use the error-correction function.
Sustained operation at standard DDR4 voltage
Continuous workloads run at the rated 2666MHz speed and 1.20V without elevated power draw. The ECC circuitry corrects single-bit errors during extended compute sessions, reducing silent data corruption. Thermal output remains consistent with typical DDR4 SO-DIMM behaviour under prolonged load.
Puntos fuertes
- 32 GB capacity handles heavy multitasking and large datasets
- DDR4 2666 MHz speed delivers fast data transfer rates
- ECC unbuffered design detects and corrects memory errors
- CL19 latency with 1.20 V voltage balances performance and efficiency
- 260-pin SODIMM form factor fits compatible laptop and workstation slots
Especificaciones
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Preguntas sobre este artículo
Will the CL19 latency limit throughput during sustained workloads?
CL19 is the rated CAS latency at 2666 MHz; sustained throughput depends on the memory controller and workload profile.
How much heat does the 1.20 V module produce when running all day?
At 1.20 V standard DDR4 voltage the module generates typical low heat for an unbuffered ECC SODIMM.
Does my laptop need a 260-pin DDR4 slot and ECC support in the BIOS?
Yes, it requires a 260-pin DDR4 SO-DIMM slot and a platform that enables ECC on unbuffered memory.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.



