Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Green rectangular circuit board with gold edge contacts and black memory chips on both sides

A-Tech

A-Tech 8GB DDR3 1333 ECC SODIMM 204-Pin 1.5V 2Rx8

SKU CH-9CNX-MK0H4

8GB DDR3 1333 ECC SODIMM adds 1.5V error-correcting memory to compatible laptops, workstations and NAS units

  • Capacity8GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes

Capacity 8GB

Speed DDR3 1333 (PC3 10600)

CAS Latency CL9

  • ECC protection guards data integrity on supported systems
  • 1333 MHz DDR3 speed matches PC3-10600 standard
  • 8 GB capacity in a single 204-pin module
  • 5 V JEDEC voltage fits standard DDR3 slots
  • Dual-rank 2Rx8 organisation for compatible platforms

ECC SODIMM for Microservers and Workstations

This 8 GB DDR3 module runs at 1333 MHz with CL9 latency and ECC error correction. It uses the 204-pin SO-DIMM form factor and operates at the standard 1.5 V. The unbuffered, dual-rank design suits compatible microservers, mobile workstations and NAS appliances.

Systems that require DDR3 ECC SODIMM

Builders whose platforms lack ECC support in the chipset or BIOS cannot use the error-correction feature and should select non-ECC memory instead. Laptops or small-form-factor devices that only accept single-rank modules may not recognise this dual-rank stick. Older boards limited to lower densities per slot will also be incompatible.

ECC Unbuffered DDR3 at 1333 MHz

The single specification that decides fit is the combination of ECC unbuffered operation and DDR3 1333 speed. If the system documentation calls for registered ECC, non-ECC, or a different DDR generation, this module will not work.

Puntos fuertes

  • ECC protection guards data integrity on supported systems
  • 1333 MHz DDR3 speed matches PC3-10600 standard
  • 8 GB capacity in a single 204-pin module
  • 5 V JEDEC voltage fits standard DDR3 slots
  • Dual-rank 2Rx8 organisation for compatible platforms

Especificaciones

BrandA-Tech
SeriesA-Tech DDR3 ECC SODIMM
ModelA-Tech 8GB 2Rx8 PC3-10600 ECC SODIMM
Part NumberNE-SS-0562
Capacity8GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesECC SODIMM
Recommend UseAMD & Intel Compatible
OptionECC SODIMM

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Will the ECC SODIMM need any periodic replacement or maintenance after installation?

The module has no moving parts and no heat spreader; once seated in a 204-pin DDR3 slot at 1.5 V it requires no scheduled replacement.

What limit appears first when the 8 GB dual-rank stick runs at 1333 MHz continuously?

The CL9 latency at PC3-10600 speed is the fixed timing ceiling; sustained workloads cannot exceed the JEDEC 1333 MHz data rate.

How much heat or noise does the unbuffered ECC module add when a server runs all day?

With no heat spreader and standard 1.50 V DDR3 voltage, the stick adds minimal thermal load and produces no audible noise.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.