Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Green 240-pin DDR3 DIMM module with black chips

A-Tech

A-Tech 8GB DDR3 1600MHz ECC RDIMM 2Rx4 1.5V 240-Pin for HP Z420 Z620 Z820

SKU CH-K8XH-C239J

ECC registered DDR3 module adds 8 GB at 1600 MHz to HP Z420, Z620 or Z820 workstations

  • Capacity8GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes

Capacity 8GB

  • 8 GB capacity handles heavier workloads
  • DDR3 1600 MHz speed improves system responsiveness
  • ECC registered design protects data integrity
  • 2Rx4 dual-rank layout increases memory density
  • Tested compatible with HP Z420, Z620, Z820 workstations

System-specific DDR3 for HP Z workstations

This 8GB DDR3 ECC registered DIMM is built for second-generation HP Z420, Z620 and Z820 workstations. It targets professionals who need reliable server-grade memory to expand or replace modules in those platforms. The single-module kit keeps upgrades simple and cost-effective.

ECC registered 2Rx4 at 1.5V

The module runs at DDR3 1600 (PC3-12800) with CL11 latency and a 2Rx4 dual-rank organisation. ECC registration is mandatory for these workstations; the module will not work in systems that require unbuffered ECC or non-ECC memory. Voltage is fixed at 1.50V.

Straightforward DIMM installation

The 240-pin DIMM seats in standard DDR3 slots without tools. Consult the workstation manual for correct channel population and seating order. Mixing speeds is possible but the system will run at the slowest module. No heat spreader is fitted, so airflow around the slots should be adequate.

Puntos fuertes

  • 8 GB capacity handles heavier workloads
  • DDR3 1600 MHz speed improves system responsiveness
  • ECC registered design protects data integrity
  • 2Rx4 dual-rank layout increases memory density
  • Tested compatible with HP Z420, Z620, Z820 workstations

Especificaciones

BrandA-Tech
Series2nd Gen. HP Z Workstation Compatible
Model8GB 2Rx4 PC3-12800 RDIMM for HP Z Workstation Z420, Z620, Z820
Part NumberNE-MS-0092
Capacity8GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHP Z Workstation Z420, Z620, Z820
OptionCompatible with HP Z Workstation Z420, Z620, Z820
FeaturesDesigned for HP Z Workstation Z420, Z620, Z820
Package ContentOne Module

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

What does the 1600MHz speed mean once the module is installed in an HP Z420, Z620 or Z820?

The DIMM operates at 1600MHz PC3-12800; the system will run at the speed of the slowest installed module.

How does the registered ECC interface affect what the workstation can use?

This is an ECC Registered RDIMM (2Rx4) and must not be mixed with ECC Unbuffered UDIMM modules in the same system.

What physical slot and pin count does this 8GB module need to fit?

It requires a 240-pin DDR3 DIMM slot on the HP Z420, Z620 or Z820 motherboard.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.