Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Four black cooling fans with cables and mounting hardware on a plain background

AFRNDK

AFRNDK Jasmine X4 noise reduction mute kit mining hardware

SKU CH-3R53-AHRXZ

Replaces ten high-speed fans with four larger units, cutting noise from 80 decibels to about 55 and halving fan power draw to 28.8 watts with plug-and-play installation

  • Cuts fan noise from 80+ dB to around 55 dB for quiet home mining
  • Halves fan power draw from 57.6 W to 28.8 W saving 28.8 W
  • Plug-and-play install by swapping the top cover, no extra tuning needed
  • Kit restores to original state simply by removing the four fans and cables
  • Built-in SSC smart chip auto-matches fan speed to the system without manual setup

Quiet mining upgrade

The AFRNDK Jasmine X4 kit replaces the stock cooling on compatible crypto mining hardware with four custom fans that each include an SSC smart chip for automatic speed control. It targets home miners who need to lower the acoustic signature of their equipment without resorting to liquid cooling or complex modifications.

Noise and power profile

The original unit runs ten small high-speed fans at 12 volts and .48 amp each, drawing 57.6w and producing 80 decibels of harsh noise. The kit cuts fan power to 28.8w and brings the sound level down to about 55 decibels, removing the sharp whine while delivering higher airflow through fewer, larger fans.

Installation trade-offs

Fitting the kit only requires removing the top cover and mounting the supplied fan assembly with the included screws and link cables, making it a plug-and-play change that can be reversed to restore the original configuration. Once installed, however, the top cover cannot be replaced during operation, so the chassis remains open while the miner is running.

Puntos fuertes

  • Cuts fan noise from 80+ dB to around 55 dB for quiet home mining
  • Halves fan power draw from 57.6 W to 28.8 W saving 28.8 W
  • Plug-and-play install by swapping the top cover, no extra tuning needed
  • Kit restores to original state simply by removing the four fans and cables
  • Built-in SSC smart chip auto-matches fan speed to the system without manual setup

Especificaciones

Aún no hay especificaciones publicadas para este artículo.

Preguntas sobre este artículo

How much quieter does the kit make the miner?

The original 10 small fans produce 80+ decibels; the kit's 4 fans with built-in SSC smart chips lower noise to about 55 decibels and remove the harsh high-pitched sound.

What power saving can I expect?

Stock fans draw 57.6 W (10 × 12 V × 0.48 A); the replacement fans draw 28.8 W total, giving a theoretical minimum saving of 28.8 W.

Will the original top cover still fit after installation?

No — the top cover cannot be reinstalled while the kit is in use, though the kit can be removed later to restore the original configuration.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.