APC
APC SRTRK2 19" Rack Rail Kit 11.5 lbs
Rack rail kit for 19" enclosures, weighing 11.5 lbs, simplifies installation with bolted snap-fit hangers and plug-in joints
- Weight11.5 lbs
- Designed for 19" rackmount NAS installations
- Weighs 11.5 lbs for manageable handling
- Gray finish matches standard server aesthetics
- Bolted snap-fit hangers simplify installation
- Plug-in joint connections eliminate special tools
APC SRTRK2 rail kit
This APC SRTRK2 rail kit fits a standard 19 rack and weighs 11.5 lbs. It provides the sliding rails required to mount compatible APC hardware securely in a server cabinet. The kit is designed for data-centre and server-room installations where equipment must be racked quickly. Builders who need a different form factor or a non-standard rack width cannot use this kit.
Compatibility check
Verify that the target enclosure uses 19 mounting holes and that the APC device you intend to install lists SRTRK2 as its approved rail kit. Confirm the cabinet depth can accept the rail length supplied with this specific model. Ensure the rack’s weight capacity covers the combined load of the appliance plus the 11.5 lbs rail set. Installers without bolted snap-fit hanger provisions should look for an alternative mounting method.
Included hardware
The package supplies the bolted snap-fit hangers and plug-in joint connections described by the manufacturer. These components simplify installation and eliminate the need for expensive special tools during deployment. No additional brackets, screws or cable-management accessories are mentioned in the supplied data. Users requiring extra cable guides or proprietary mounting plates must source them separately.
Puntos fuertes
- Designed for 19" rackmount NAS installations
- Weighs 11.5 lbs for manageable handling
- Gray finish matches standard server aesthetics
- Bolted snap-fit hangers simplify installation
- Plug-in joint connections eliminate special tools
Especificaciones
| Brand | Schneider Electric |
|---|---|
| Model | SRTRK2 |
| Weight | 11.5 lbs |
Preguntas sobre este artículo
Does the APC SRTRK2 kit include mounting screws or do I need to buy them separately?
The kit supplies the rails for a 19 inch rack; mounting hardware for the server chassis is not included and must be sourced separately.
Is the SRTRK2 available in different lengths or weight ratings?
Only the 11.5 lb version is offered, designed for standard 19 inch rack mounting.
Will the 11.5 lb rail kit support a fully loaded 2U server in a 19 inch cabinet?
The rails are built for 19 inch racks and rated at 11.5 lbs; verify your server’s weight against that figure before installing.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
