Axiom
Axiom SSDEV20HA960-AX 960GB enterprise SSD
A 2.5-inch SATA hot-swap SSD delivering 960 GB capacity, 1.4 DWPD endurance and up to 99K read IOPS for 24/7 data-centre workloads
- 960 GB capacity supports expanding storage infrastructure
- 4 DWPD endurance rating sustains mixed-use workloads
- 99K read IOPS accelerates latency-sensitive applications
- SATA interface integrates with existing 2.5-inch hot-swap bays
- V-NAND technology delivers consistent I/O performance 24/7
Capacity and Interface
The Axiom SSDEV20HA960-AX is a 960GB enterprise solid state drive built for 2.5in hot-swap bays. It connects through a 6Gb/S Sata interface and uses 3-bit MLC V-NAND flash memory to serve latency-sensitive and mixed-use workloads in data centre environments. The drive is rated for 1.4 Drive Writes Per Day and delivers sustained performance of up to 99K read IOPS and 18K write IOPS.
Fit and Exclusions
This SSD suits operators who need hot-swap Sata expansion with enterprise-grade power-loss protection and consistent low-latency throughput for virtualised or converged architectures. It is not for buyers who require a PCIe interface, nor for those who need higher endurance than 1.4 DWPD or capacities beyond 960GB. Systems limited to legacy Sata backplanes will benefit from the drop-in form factor and 24/7 operational design.
Deciding Specification
The 1.4 DWPD endurance rating is the single figure that determines whether this drive matches the write intensity of the target workload. At 1.4 DWPD the EV200 is positioned for read-intensive and mixed-use applications rather than write-heavy logging or caching tiers. Confirm the application’s daily write volume against this rating before deployment.
Puntos fuertes
- 960 GB capacity supports expanding storage infrastructure
- 4 DWPD endurance rating sustains mixed-use workloads
- 99K read IOPS accelerates latency-sensitive applications
- SATA interface integrates with existing 2.5-inch hot-swap bays
- V-NAND technology delivers consistent I/O performance 24/7
Especificaciones
Aún no hay especificaciones publicadas para este artículo.
Preguntas sobre este artículo
Does the 2.5-inch hot-swap form factor fit standard server drive bays?
Yes, the 2.5-inch hot-swap design fits standard enterprise server bays and backplanes that accept 2.5-inch SATA drives.
What is the key step to ensure the drive is recognised during hot-swap installation?
Insert the drive fully until the latch clicks so the SATA connector seats properly on the backplane.
When will the 1.4 DWPD endurance rating require drive replacement?
Replacement timing depends on your daily write volume; at 1.4 drive writes per day the warranty endurance is reached after the rated period.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.
