Axiom
Axiom SSDEV20HC240-AX enterprise SSD 240 Gb 2.5 inch Sata
Hot-swap 2.5 inch Sata SSD with 1.4 DWPD endurance and up to 99K read IOPS for latency-sensitive enterprise workloads
- Optimised for latency-sensitive workloads with V-NAND technology
- Enterprise endurance rated at 1.4 DWPD for mixed use
- Sustained read IOPS up to 99K for fast access
- Hot-swap 2.5-inch SATA design fits existing infrastructure
- Low power consumption and power-loss protection safeguard data
Enterprise storage for 24/7 workloads
The Axiom SSDEV20HC240-AX is a 240 Gb enterprise SSD built for latency-sensitive and mixed-use applications in data centres. It uses V-NAND technology to deliver consistent IOPS and low latency around the clock. The drive fits 2.5 inch hot-swap bays and connects via Sata 6Gb/s. It is designed for read-intensive tasks where data integrity and uptime are critical.
Upgrade from mechanical arrays
This SSD replaces traditional hard drives in servers that need higher sustained throughput without changing the existing Sata infrastructure. The jump is worth it when workloads demand up to 99K read IOPS and 18K write IOPS with 1.4 drive writes per day endurance. It lowers total cost of ownership by reducing power draw and eliminating mechanical failure points. The hot-swap design allows non-disruptive installation in live environments.
Limits of the Sata interface
The Sata 6Gb/s link caps maximum sequential throughput well below modern PCIe alternatives. Write-heavy workloads exceeding 1.4 DWPD will wear the 3-bit MLC NAND faster than rated. The 240 Gb capacity suits boot, cache or metadata tiers but not bulk data lakes. Buyers needing higher write endurance or larger single-drive capacity should evaluate other interfaces.
Puntos fuertes
- Optimised for latency-sensitive workloads with V-NAND technology
- Enterprise endurance rated at 1.4 DWPD for mixed use
- Sustained read IOPS up to 99K for fast access
- Hot-swap 2.5-inch SATA design fits existing infrastructure
- Low power consumption and power-loss protection safeguard data
Especificaciones
Aún no hay especificaciones publicadas para este artículo.
Preguntas sobre este artículo
Will the 2.5 inch hot-swap form factor fit my server's drive bay?
The drive uses a standard 2.5 inch hot-swap design that slides directly into compatible server bays without adapters.
What is the correct way to install the drive without damaging the SATA connector?
Align the drive with the bay rails, push firmly until the SATA connector seats fully, then engage the locking lever to secure it.
How long will the V-NAND flash last under continuous 24/7 mixed workloads?
The drive is rated for 1.4 drive writes per day, providing enterprise endurance for read-intensive applications.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
