Axiom
Axiom SSDEV20LE480-AX enterprise SSD 480 GB SATA 600 3.5" hot-swap
480 GB enterprise SATA SSD with 525 MB/s read and 460 MB/s write speeds in a hot-swap 3.5" form factor
- 480 GB capacity supports large enterprise datasets
- 525 MB/s read speed accelerates data access
- 460 MB/s write speed handles intensive workloads
- SATA 600 interface integrates with existing server infrastructure
- 5-inch hot-swap form factor enables drive replacement without downtime
480 GB SATA enterprise SSD
The Axiom SSDEV20LE480-AX is a 480 GB solid-state drive built for server and storage arrays. It uses a SATA 600 interface and a 3.5 inch hot-swap form factor for direct insertion into compatible drive bays. Sequential reads reach 525 MB/s and writes reach 460 MB/s. The drive carries RoHS certification and a three-year limited warranty.
Suited for SATA hot-swap bays
This unit fits administrators who need a 3.5 inch SATA drive that can be replaced without powering down the chassis. It is not for systems that only accept 2.5 inch drives or that require a different physical interface. Buyers needing higher throughput than 525 MB/s read or 460 MB/s write should evaluate other options. Environments demanding a capacity other than 480 GB will need a different model.
SATA 600 interface decides compatibility
The drive communicates over SATA 600, so the host backplane or controller must support that standard. If the slot or controller uses a different signalling protocol the drive will not function. Verify the bay accepts 3.5 inch hot-swap SATA devices before purchase.
Puntos fuertes
- 480 GB capacity supports large enterprise datasets
- 525 MB/s read speed accelerates data access
- 460 MB/s write speed handles intensive workloads
- SATA 600 interface integrates with existing server infrastructure
- 5-inch hot-swap form factor enables drive replacement without downtime
Especificaciones
Aún no hay especificaciones publicadas para este artículo.
Preguntas sobre este artículo
Does the 480 GB drive have a wear indicator or require any scheduled replacement?
The drive is covered by a three-year limited warranty; no user-serviceable wear indicator or scheduled replacement interval is published by the manufacturer.
What limits sustained write performance on the SATA 600 interface?
The maximum write transfer rate is 460 MB/s, so the drive itself is the bottleneck before the SATA 600 link saturates.
How much heat and power does the 3.5" hot-swap unit produce during all-day operation?
Typical enterprise SATA SSDs of this class draw under 5 W active and run warm to the touch; adequate chassis airflow keeps temperatures within the rated operating range.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
