BIWIN STORAGE TECHNOLOGY LIMITED
BIWIN STORAGE TECHNOLOGY LIMITED 120GB MLC SATA M.2 2242 internal SSD
- Internal Solid Stat…
- M.2 2242
35,99 US$
0.00045118BTC
En stock
BIWIN STORAGE TECHNOLOGY LIMITED
BIWIN STORAGE TECHNOLOGY LIMITED 60GB MLC SATA M.2 2242 internal SSD
60 GB MLC SATA M.2 2242 internal SSD with 2,000,000-hour MTBF and 50G shock resistance
- Device TypeInternal Solid State Drive (SSD)
- Form FactorM.2 2242
- Capacity60GB
- Memory ComponentsMLC
- InterfaceSATA III
- MTBF2,000,000 hours
Options 60GB
- 120GB
- 60GB
- MLC flash delivers consistent write endurance
- SATA III 6Gb/s interface supports up to 60GB capacity
- 2,000,000 hour MTBF indicates long service life
- 27W idle and 1.97W active draw reduces system power load
- 50G shock and 3.1G vibration resistance protect data in mobile use
60 GB MLC SATA M.2 2242 Drive
This 60 GB internal SSD uses MLC flash and a SATA III 6 Gb/s interface in the M.2 2242 form factor. It targets compact systems such as Intel NUC units that need reliable storage in a small footprint. The drive weighs 5.4 g and measures 42 mm by 22 mm by 3.2 mm.
Thermals, Noise and Power Draw
With no moving parts the drive runs silently in normal use. Idle power draw is 0.27 W and active power draw is 1.97 W at 3.3 V. The operating temperature range is 0 °C to 70 °C and the storage range is -40 °C to 85 °C. Humidity tolerance spans 5 % to 95 %.
Sustained Load Behaviour
Under sustained workloads the controller manages heat within the 0 °C to 70 °C operating window without throttling. BCH ECC at 66 bits per 1 KB protects data integrity during long write sessions. MTBF is rated at 2,000,000 hours. Shock resistance is 50 G for 11 ms half-sine and vibration resistance is 3.1 G from 2 Hz to 500 Hz.
Puntos fuertes
- MLC flash delivers consistent write endurance
- SATA III 6Gb/s interface supports up to 60GB capacity
- 2,000,000 hour MTBF indicates long service life
- 27W idle and 1.97W active draw reduces system power load
- 50G shock and 3.1G vibration resistance protect data in mobile use
Especificaciones
| Brand | BIWIN |
|---|---|
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2242 |
| Capacity | 60GB |
| Memory Components | MLC |
| Interface | SATA III |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 0.27W (Idle) |
| Power Consumption (Active) | 1.97W |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| Operating Humidity | 5% to 95% |
| Max Shock Resistance | 50G,11ms, half-sine wave |
| Max Vibration Resistance | 3.1G(2-500Hz) |
| Height | 42mm |
| Width | 22mm |
| Depth | 3.2mm |
| Weight | =5.4g |
Otras versiones de este modelo
1 más en esta gama
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Preguntas sobre este artículo
Will this M.2 2242 drive fit my Intel NUC?
The supplier highlights Intel NUC compatibility, and the 22 mm by 42 mm dimensions match the standard M.2 2242 slot used in many NUC models.
What power draw should I expect from this 60 GB SSD?
Idle power is 0.27 W and active power reaches 1.97 W, both at a 3.3 V supply, so a typical laptop or embedded board can supply it without extra hardware.
How durable is the MLC flash in this drive?
MLC memory combined with a 2,000,000 hour MTBF and 50 G shock resistance indicates strong endurance for industrial or mobile workloads.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
