Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Green 168-pin DIMM stick with black chips, no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM12864133DIMM 1GB PC133 DIMM memory upgrade

SKU CH-KX41-8NJBZ

Adds 1 GB of PC133 SDRAM to Roland Fantom-G6, G7 and G8 keyboards via a 168-pin DIMM

  • Capacity1GB
  • SpeedPC 133
  • CAS LatencyCL3
  • Timing3-3-3
  • Voltage3.3V
  • ECCNo
  • Guaranteed compatibility with Roland Fantom-G6, G7, G8 keyboards
  • 1 GB capacity adds maximum supported memory for the instrument
  • PC133 133 MHz speed matches original system specification
  • 168-pin DIMM form factor fits the single memory socket
  • Unbuffered non-ECC design with CL3 3-3-3 timing for stable operation

Roland Fantom-G compatible upgrade

This 1GB PC133 SDRAM DIMM is built specifically for the Roland Fantom-G6, Fantom-G7 and Fantom G8 keyboards. It fits the single 168-pin slot and matches the factory voltage of 3.3V so the instrument recognises the module immediately. Musicians restoring or expanding a Fantom-G workstation can install it without configuration changes.

Low-voltage unbuffered operation

Running at 133 MHz with CL3 3-3-3 timings, the stick draws minimal current from the keyboard’s internal supply. No heat spreader is fitted and the unbuffered design adds no active components, so the module stays cool and silent inside the sealed chassis. Normal playing sessions produce no audible noise or thermal throttling.

Steady sustained performance

The Major Brand Chipset and 2Rx8 organisation deliver consistent bandwidth during long sampling or sequencing sessions. Because the Fantom-G only accepts one module, the full 1GB capacity is always available and there is no interleaving delay. The memory maintains rated speed continuously without downclocking.

Puntos fuertes

  • Guaranteed compatibility with Roland Fantom-G6, G7, G8 keyboards
  • 1 GB capacity adds maximum supported memory for the instrument
  • PC133 133 MHz speed matches original system specification
  • 168-pin DIMM form factor fits the single memory socket
  • Unbuffered non-ECC design with CL3 3-3-3 timing for stable operation

Especificaciones

BrandComputer Memory Solutions
ModelCM12864133DIMM
Capacity1GB
SpeedPC 133
CAS LatencyCL3
Timing3-3-3
Voltage3.3V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemRoland Fantom-G6, Fantom-G7, Fantom G8 Keyboard
Package Content1 Memory RAM Stick

Preguntas sobre este artículo

How do I install the 168-pin DIMM in my Roland Fantom-G keyboard, and what step is most often missed?

Power off the keyboard, open the memory compartment, align the notches on the 168-pin DIMM with the slot key, press firmly until both side clips click, then verify the module is seated evenly before closing the cover.

What maintenance or replacement will the CM12864133DIMM need over time?

The unbuffered non-ECC SDRAM has no moving parts or batteries; keep the slot contacts clean and reseat the stick if the keyboard fails to recognise the 1GB capacity after transport or vibration.

What limit appears first when the Roland Fantom-G runs sustained workloads with this PC133 module?

The single 168-pin socket caps total memory at 1GB, so the capacity ceiling is reached before the 133 MHz speed or 3.3 V supply becomes a bottleneck.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.