Computer Memory Solutions
Computer Memory Solutions CM5126410600SODRH 8GB DDR3 1333MHz 2x4GB SODIMM memory upgrade
Two 4 GB DDR3-1333 SO-DIMM modules upgrade compatible Apple iMac 21.5-inch systems
- Capacity8GB (2 x 4GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL7
- Timing7-7-7
- Voltage1.5V
- 8GB dual-channel kit boosts multitasking headroom
- 1333 MHz DDR3 speed matches factory spec
- CL7 latency tightens response times
- 204-pin SODIMM form factor fits iMac slots
- Tested for Apple iMac 21.5-inch 2.5 GHz Intel Core i5 (MC309LL/A)
8GB DDR3 SO-DIMM kit for Apple iMac
This 8GB kit contains two 4GB DDR3-1333 SO-DIMM modules built to the PC3-10600 standard. They run at 1.5V with CL7 7-7-7 timings and use an unbuffered, non-ECC 204-pin layout. The package is intended as a direct memory upgrade for compatible Apple iMac desktops.
Suits owners of listed iMac models needing 8GB
The modules are validated for the iMac 21.5-inch 2.5GHz Core i5 (MC309LL/A), 21.5-inch 2.7GHz Core i5 (MC812LL/A), 21.5-inch 2.8GHz Core i7, 27-inch 2.7GHz Core i5 (MC813LL/A), 27-inch 3.1GHz Core i5 (MC814LL/A) and 27-inch 3.4GHz Core i7. Buyers with systems that require ECC or registered memory, or laptops and other desktops not in the compatibility list, should look elsewhere.
204-pin DDR3 SO-DIMM form factor decides fit
Each stick uses the 204-pin DDR3 SO-DIMM interface, which is physically and electrically distinct from other memory types. Only machines that accept DDR3 SO-DIMM modules at 1333MHz can use this kit; the pin count and notch position prevent insertion into incompatible slots.
Puntos fuertes
- 8GB dual-channel kit boosts multitasking headroom
- 1333 MHz DDR3 speed matches factory spec
- CL7 latency tightens response times
- 204-pin SODIMM form factor fits iMac slots
- Tested for Apple iMac 21.5-inch 2.5 GHz Intel Core i5 (MC309LL/A)
Especificaciones
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126410600SODRH |
| Capacity | 8GB (2 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL7 |
| Timing | 7-7-7 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Apple Imac 21.5-Inch 2.5Ghz Intel Core I5 (MC309LL/A) |
| Package Content | 2 Memory RAM Sticks |
Preguntas sobre este artículo
How do I install the 204-pin DDR3 SO-DIMM modules in my iMac, and what step do people often miss?
Power off and unplug the iMac, remove the memory access door on the bottom edge, eject the existing modules by spreading the side clips, align the notch on each 204-pin stick with the slot key, press firmly until the clips snap shut, then replace the door before powering on.
What maintenance or replacement will this 1.5V DDR3 1333MHz kit need over time?
No routine maintenance is required; keep the interior dust-free and ensure the cooling vents stay clear so the unbuffered modules remain within thermal limits.
What limit appears first when the 2Rx8 CL7 memory runs sustained workloads on a 21.5-inch iMac?
The memory controller caps bandwidth at DDR3-10600 speeds, so sustained throughput cannot exceed the 1333 MHz data rate regardless of load duration.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.



