DELL
DELL 086DD-CP1 1.92TB 12Gbps SAS 2.5 enterprise SSD
1.92 TB SAS enterprise SSD for read-intensive workloads in compatible Dell PowerEdge servers
- InterfaceSAS
- 92 TB capacity supports large enterprise workloads
- 12 Gbps SAS interface delivers high-speed data transfer
- Read-intensive TLC design optimises endurance for read-heavy applications
- 5-inch form factor fits standard server drive bays
- Compatible with extensive Dell PowerEdge server range
Dell 1.92 TB SAS enterprise SSD
The 086DD-CP1 is a 1.92 TB solid-state drive built for Dell PowerEdge servers. It uses a 12 Gbps SAS interface and read-intensive TLC NAND to deliver consistent throughput for mixed workloads. The 2.5 inch form factor fits standard hot-swap bays in rack and tower chassis. Firmware is updated and every unit is tested before shipment.
Fits PowerEdge bays and frees PCIe slots
The drive slides directly into 2.5 inch SAS backplanes on supported PowerEdge models including R630, R740, R750 and MX740c. No adapter or extra cabling is required because the SAS connection is native to the server midplane. Using this drive leaves PCIe slots open for network cards, GPU accelerators or additional storage controllers. Hot-plug capability allows replacement without powering down the host.
Replaces slower SAS HDDs or smaller SSDs
Moving from 10 K or 15 K RPM SAS hard drives to this SSD cuts latency and raises random read IOPS for database and virtualisation workloads. The jump is worth it when the current array is the bottleneck for read-heavy applications such as web serving or log analytics. It is not suited for write-intensive tasks such as high-frequency logging or sustained video ingest where endurance would be exceeded.
Puntos fuertes
- 92 TB capacity supports large enterprise workloads
- 12 Gbps SAS interface delivers high-speed data transfer
- Read-intensive TLC design optimises endurance for read-heavy applications
- 5-inch form factor fits standard server drive bays
- Compatible with extensive Dell PowerEdge server range
Especificaciones
| Brand | Dell |
|---|---|
| Model | 086DD, MZILS1T9HEJH0D3 |
| Interface | SAS |
Preguntas sobre este artículo
At what point does the 1.92TB capacity limit sustained write workloads?
The drive is rated for read-intensive use with TLC NAND, so sustained heavy writes will hit endurance limits before the 1.92TB capacity fills.
How much heat and power does the PM1633a generate during 24/7 operation in a 2.5-inch bay?
As a 12Gbps SAS read-intensive SSD, it draws low power and produces minimal heat compared with mechanical drives in the same form factor.
Which server backplane and controller are required to run this 12Gbps SAS SSD?
It needs a 12Gbps SAS backplane and a compatible RAID controller or HBA; the drive is validated for the listed PowerEdge and PowerVault models.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
