DELL
DELL 1.92TB Data Center NVMe RI TLC 2.5 SSD CD8-R
Enterprise NVMe SSD with 1.92TB capacity for read-intensive workloads in compatible Dell PowerEdge servers
- InterfaceDoes Not Apply
- 92 TB capacity for data-centre workloads
- NVMe interface for high-speed access
- Read-intensive TLC design optimised for read-heavy tasks
- 5 inch form factor fits standard drive bays
- Compatible with Dell PowerEdge R650, R750, R760 and more
Dell 1.92TB NVMe RI TLC SSD
This enterprise solid-state drive delivers 1.92TB of capacity in a 2.5-inch form factor for Dell PowerEdge servers. It uses NVMe Gen4 RI TLC flash tuned for read-intensive workloads such as boot, logging and caching. The component is tested with updated firmware and arrives new.
Thermals noise and power draw
The drive operates within standard enterprise SSD thermal limits for 2.5-inch bays in supported PowerEdge chassis. No active cooling is required beyond the server’s built-in airflow design. Power consumption scales with queue depth and remains typical for RI-class NVMe devices.
Upgrade path and fit
This SSD replaces failed or lower-capacity NVMe drives in the listed PowerEdge models including R650, R750, R760 and MX750C. The jump is worthwhile when read-heavy applications need more headroom without adding write-endurance cost. It is not suited for workloads that demand sustained high write throughput or mixed-use endurance ratings.
Puntos fuertes
- 92 TB capacity for data-centre workloads
- NVMe interface for high-speed access
- Read-intensive TLC design optimised for read-heavy tasks
- 5 inch form factor fits standard drive bays
- Compatible with Dell PowerEdge R650, R750, R760 and more
Especificaciones
| Brand | Dell |
|---|---|
| Model | KCD8XRUG1T92, NNKCT |
| Interface | Does Not Apply |
Preguntas sobre este artículo
How is the 2.5 NVMe SSD installed in a PowerEdge R750, and which step is often missed?
Slide the drive into a hot-swap bay until the latch clicks, then verify the green activity LED lights; the step often missed is confirming the controller recognises the 1.92TB volume in the BIOS before booting the OS.
What maintenance or replacement will the 1.92TB RI TLC drive need during its service life?
The read-intensive TLC NAND is rated for 1 DWPD; plan to replace the drive once the SMART media-wear indicator reaches the threshold, typically after the rated petabytes-written limit is reached.
What limit appears first on the CD8-R during sustained write workloads?
The 1 DWPD endurance rating is the first constraint; continuous writes that exceed the daily budget will trigger wear-leveling throttling before thermal limits are reached.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.
