DELL
DELL 1.92TB SAS Enterprise SSD NRR34-CP2
A 1.92 TB enterprise SSD with a 24 Gbps SAS interface for read-intensive workloads in compatible PowerEdge servers
- InterfaceSAS
- 92 TB capacity supports large enterprise datasets
- 24 Gbps SAS interface delivers high-speed data transfer
- Read-intensive TLC design optimised for read-heavy workloads
- 5 inch form factor fits standard server bays
- Compatible with Dell PowerEdge R750, R760, MX750C and many other models
Dell 1.92TB SAS Enterprise SSD
The Dell NRR34-CP2 is a 1.92TB enterprise solid-state drive built for read-intensive workloads. It uses a SAS interface rated at 24Gbps and a 2.5-inch form factor. The drive suits administrators deploying Dell PowerEdge servers or storage arrays that require consistent read throughput.
Installation in compatible Dell systems
The SSD fits standard 2.5-inch drive bays in the listed PowerEdge and PowerVault models. Firmware is updated before shipment so the drive is recognised immediately by the server controller. Errors occur when the drive is inserted into a backplane that does not support 24Gbps SAS signalling or when the server firmware is older than the drive requires.
Sustained read-intensive operation
The read-intensive TLC NAND and PM1653 controller maintain steady throughput during long sequential reads typical of content delivery or analytics jobs. Write latency rises once the SLC cache is exhausted, so the drive is not suited for write-heavy databases or logging workloads. Thermal throttling engages only under continuous maximum-rate reads in poorly ventilated chassis.
Puntos fuertes
- 92 TB capacity supports large enterprise datasets
- 24 Gbps SAS interface delivers high-speed data transfer
- Read-intensive TLC design optimised for read-heavy workloads
- 5 inch form factor fits standard server bays
- Compatible with Dell PowerEdge R750, R760, MX750C and many other models
Especificaciones
| Brand | Dell |
|---|---|
| Model | MZILG1T9HCJRAD3, NRR34 |
| Interface | SAS |
Preguntas sobre este artículo
How do I verify the 24Gbps SAS link is active after installing the NRR34-CP2?
Check the controller BIOS or OS storage utility for a negotiated 24Gbps link speed and confirm the drive reports as MZILG1T9HCJRAD3 with the correct 1.92TB capacity.
Does the NRR34-CP2 ship with a 2.5-inch drive tray or caddy for PowerEdge servers?
The drive is supplied as a bare 2.5-inch SSD; a Dell hot-plug tray or caddy matching your specific PowerEdge chassis must be purchased separately.
Which capacity should I choose between the 1.92TB NRR34-CP2 and other SAS SSDs for read-intensive workloads?
Select the 1.92TB NRR34-CP2 when you need a single 24Gbps SAS read-intensive TLC drive compatible with the listed PowerEdge and ME series servers.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.
